Download Print this page
Pearl PSP Installation And Operating Instructions

Pearl PSP Installation And Operating Instructions

Self-priming peripheral pumps

Advertisement

Quick Links

This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
ATTENTION: If the appliance or the supply cord is
damaged, it must be repaired by manufacturer, its
service agent or qualified person.
Meaning of crossed –out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal
waste, use separate collection facilities.
Contact you local government for information regarding the
collection systems available.
Before installation, you should carefully read this manual, and
pay attention to safety cautions and instructions in this manual.
Our factory is neither responsible for nor is reliable for paying
compensation for personal injury, pump damage and other
property losses caused by violation of safety cautions.
1. APPLICATIONS
1.1 It is applicable to household water supply, equipment
support, small airconditioning system, pipeline pressurization,
garden watering, vegetable greenhouse watering, fish breeding
and poultry raising, etc..
1.2 Transfer clean water and other non-corrosive liquids with
low viscosity; do not transport inflammable, explosive, gasified
liquids and liquids containing solid particles or fibers. The PH of
water must between 6.5 and 8.5.
Remark:
This series of pump could be transformed into automatic water
pump, which is realized through external automatic plant that
is composed of pressure switch, pressure tank, etc.. Function
features of the automatic pump are as follows: when the power
is on, turn on the water tap and the pump will start working
automatically; when the water tap is turned off, the pump will
stop
working automatically. If a water tower is used along with the
automatic pump, connect to the upper limit switch and the pump
will start or stop working automatically with water level in the
water tower.
2. MODEL DESCRIPTION
PSP
X
Rated power(x 10W)
PEARL Series Self-priming Peripheral Pump
INSTALLATION AND OPERATING INSTRUCTIONS
3. TECHNICAL DATA
Max. flow: 70 L/min
Max. head: 75m
Output power: 0.37~1.1kW
Max. suction: 9 m
Insulation class: IPX4
Protection class: F
Max. ambient temperature: +40°C
Max. liquid temperature: +60°C
4. IMPLEMENTATION STANDARDS
IEC/EN 60335-1 Household and similar electrical appliances-safety
Part1: General requirements.
IEC/EN 60335-2-41 Household and similar electrical appliances-
-safety
Part2-41: Particular requirements for pump.
2006/95/EC Low valtage directive
5. SAFETY PRECAUTIONS
Self-priming Peripheral Pumps
5.1 To ensure normal and safety
operation of the electric pump,
read the manual carefully before
use.
M a n u a
l
ON
OFF
1
1
0
0
5.2 The electric pump should
have reliable grounding to prevent
short circuit; for safety, leakage
protection
equipped and be careful no to wet
the power plug; socket should be
connected in damp - proof area.
PSP
switch
should
be

Advertisement

loading
Need help?

Need help?

Do you have a question about the PSP and is the answer not in the manual?

Questions and answers

Summary of Contents for Pearl PSP

  • Page 1 2. MODEL DESCRIPTION short circuit; for safety, leakage protection switch should equipped and be careful no to wet the power plug; socket should be Rated power(x 10W) connected in damp - proof area. PEARL Series Self-priming Peripheral Pump...
  • Page 2 6. PRODUCT STRUCTURE 5.3 Do not touch the electric pump while working; do not wash, swim near working area or let livestock into the water to avoid accidents . 5.4 Avoid splashing pressured water to the electric pump as well as prevent the pump immersed by water.
  • Page 3 CORRECT INSTALLATION DIAGRAM 8) Filter should be installed in inlet pipelines so as to avoid solid particles to enter into the electric pump. C: INSTALLATION PRECAUTIONS OF THE OUTLET PIPELINE Pipe diameter of the outlet pipeline should be at least in accordance with that of the water outlet, so as to reduce its voltage drop, high flow rate and noise to the minimum.
  • Page 4 the pump chamber with clean water from the water pump again, open the drain plug, fill water and tighten it and then injectionhole, then tighten the plug screw after the air has been the pump is usable. completely discharged. Set the valve in a smaller flow in start-up and adjust to the required flow after water discharging (working 4) In case not use for a long time, water in the pump should range is displayed on the nameplate).