Download Print this page
Pearl JCCH Series Installation And Operating Instructions Manual

Pearl JCCH Series Installation And Operating Instructions Manual

Self priming jet pumps

Advertisement

Quick Links

1. GENERAL INFORMATION
Before using the product carefully read the information contained
in this instruction manual, the manual should be kept for future
reference.
This manual is part of the essential safety requirement and must
be retained until the product is finally decommissioned.
The customer, in case of loss, can request a copy of the manual
by contacting the manufacturer or their agent, specifying the
type of product data shown on the label of the machine (see 2.3
Marking)
Any changes, alterations or modifications made to the product or
part of it, not authorized by the manufacturer, will revoke the "CE
declaration" and warranty.
This appliance should not be operated by children younger
than 8 years, people with reduced physical, sensory or mental
capacities, or inexperienced people who are not familiar with the
product, unless they are given close supervision or instructions
on how to use it safely and are made aware by a responsible
person of the dangers its use might entail.
Children must not play with the appliance.
It is the user's responsibility to clean and maintain the appliance.
Children should never clean or maintain it unless they are given
supervision.
Do not use in ponds, tanks or swimming pools or where people
may enter or come into contact with the water.
Read carefully the installation section which sets forth:
- The maximum permissible structural working pressure
(chapter 3.1).
- The type and section of the power cable (chapter 6.5).
- The type of electrical protection to be installed (chapter 6.5).
1.1. Symbols
To improve the understanding of the manual, below are
indicated the symbols used with the related meaning.
Information and warnings that must be observed,
otherwise there is a risk that compromise personnel
safety.
The failure to observe electrical information and
warnings, could damage the machine or compromise
personnel safety.
Information and warnings that must be observed,
otherwise there is a risk that compromise personnel
i i
safety.
i i i
Notes and warnings for the correct management of the
machine and its parts.
Operations that could be performed by the final
user. After carefully reading of the instructions, is
responsible for maintenance under normal conditions.
They are authorized to affect standard maintenance
operations.
INSTALLATION AND OPERATING INSTRUCTIONS
i
i
i
i
i
OFF
OFF
ON
OFF
OFF
OFF
ON
ON
ON
ON
1.2. Authorized operators
The product is intended for use by expert operators divided into
end users and specialized technicians. (see the symbols above).
It's forbidden, for the end user, carry out operations which must
be done only by specialized technicians. The manufacturer
declines any liability for damage related to the non-compliance
of this warning.
1.3. Warranty
For the product warranty refer to the general terms and
conditions of sale.
JCCH - JCCQ
JSCH - JSCQ
SELF PRIMING JET PUMPS
Operations that must be performed by a qualified elec-
trician. Specialized technician authorized to affect all
electrical operations including maintenance. They are
able to operate with in the presence of high voltages.
Operations that must be done performed by a
qualified technician. Specialized technician able
to install the device, under normal conditions,
working during "maintenance", and allowed to
do electrical and mechanical interventions for
maintenance. They must be capable of executing simple
electrical and mechanical operations related to the
maintenance of the device.
Indicates that it is mandatory to use individual
protection devices.
OFF - Operations that must be done with the device
switched off and disconnected from the power supply.
ON - Operations that must be done with the device
switched on.

Advertisement

loading

Summary of Contents for Pearl JCCH Series

  • Page 1 JCCH - JCCQ JSCH - JSCQ SELF PRIMING JET PUMPS INSTALLATION AND OPERATING INSTRUCTIONS 1. GENERAL INFORMATION Before using the product carefully read the information contained in this instruction manual, the manual should be kept for future reference. This manual is part of the essential safety requirement and must be retained until the product is finally decommissioned.
  • Page 2: Technical Description

    The warranty covers only the replacement and the 3. TECHNICAL FEATURES repair of the defective parts of the goods (recognized by the manufacturer). 3.1. Technical data The Warranty will not be considered in the following cases: Dimensions and weight (see technical catalogue). Nominal speed 3450 rpm - Whenever the use of the device does not conform to the Protection TEFC...
  • Page 3: Transportation And Handling

    4.5. Individual protection devices 6.4.1. Pipes During installation, starting and maintenance it is suggested Ensure the insides of pipes are clean and unobstructed before to the authorized operators to consider the use of individual connection. protection devices suitable for described activities. During ordinary and extraordinary maintenance interventions, ATTENTION: The pipes connected to the pump should be safety gloves are required.
  • Page 4: Startup And Operation

    Use only copper wire to motor and ground. The ground wire Never run the pump for more than five minutes with a MUST be at least as large as the wire to the motor. closed gate valve. Wires should be color coded for ease of maintenance. Compare the frequency and mains voltage with the name-plate Prolonged operation without a change of water in the pump data and connect the supply conductors to the terminals in...
  • Page 5: Maintenance

    9. DISPOSAL expected disconnecting devices. (see paragraph “6.5 Electrical connection”). 8. MAINTENANCE The final disposal of the device must be done by specialized Before any operations it’s necessary to disconnect the company. power supply. Make sure the specialized company follows the classification of the material parts for the separation.
  • Page 6 PROBLEM POSSIBLE CAUSE REMEDY Check that the mains frequency and voltage correspond to the electrical Unsuitable power supply characteristics shown on the indicator plate Connect the power supply cable to the terminal board correctly. Check that the thermal overload protection is set correctly (see data on the Incorrect electrical connections engine indicator plate) and make sure that the fuseboard upline of the engine has been properly connected...

This manual is also suitable for:

Jccq seriesJsch seriesJscq series