Download Print this page
Antari Z-300 Fazer User Manual
Hide thumbs Also See for Z-300 Fazer:

Advertisement

Quick Links

Introduction
Thank you for choosing an ANTARI Fazer. You now own a rugged and powerful state-of-the-art machine.
Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions found
in this user manual, you can look forward to the reliable and satisfactory performance of your ANTARI
Fazer for years to come.
Please follow these operation and safety instructions to ensure a long and
Cautions
Do not overfill your ANTARI Fazer. Overfilling will cause the unit to clog.
Keep this device dry.
For inside use only. Not designed for outside use.
For the 110V models, use 3-prong grounded electrical outlet only. Prior to use take care to determine
that the unit is installed at the rated voltage.
Always unplug your ANTARI Fazer before filling its tank.
Keep Fazer upright.
Turn off or unplug when not in use.
This machine is not water- or splash-proof. If moisture, water, or fog liquid gets inside the housing,
immediately unplug the unit and contact a service technician or your ANTARI dealer before using it
again.
No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service personnel.
For adult use only. Fazer must be installed out of the reach of children. Never leave the unit running
unattended.
Never aim the output at open flames.
Never add flammable liquids of any kind (oil, gas, perfume) to the Fazer liquid or the fluid container.
Pay attention to all warning labels and instructions printed on the exterior of your ANTARI Fazer
Use only high-quality Antari fog liquid or suitable dealer recommended fog fluid.
Always make s ure there is sufficient liquid in the Fazer liquid tank. Operating this unit without liquid
may cause permanent damage to the machine.
If your ANTARI Fazer fails to work properly, discontinue use immediately. Drain all Fazer liquid from
the tank, pack the unit securely (preferably in the original packing material), and return it to your
ANTARI dealer for service.
Never drink Fazer liquid. If it is ingested, call a doctor immediately. If Fazer liquid comes in contact
with skin or eyes, rinse thoroughly with water.
Unpacking & Inspection
Open the shipping carton and verify that all equipment necessary to operate the system has arrived
intact.
Antari Z-300 Fazer
Congratulations on the purchase of your new
ANTARI FAZER.
safe life for your Fazer.
Danger of electric shock
Danger of explosion
User Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the Z-300 Fazer and is the answer not in the manual?

Questions and answers

Summary of Contents for Antari Z-300 Fazer

  • Page 1 Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of your ANTARI Fazer for years to come.
  • Page 2 Place Fazer on a flat surface and remove Fazer liquid tank cap. ♦ Pour Antari Fog Liquid into the liquid tank, being careful not to exceed the maximum fluid level. DO NOT OVERFILL. Use only ANTARI Fog Liquid or other dealer-recommended high-quality Fog fluid .
  • Page 3 Do not use liquids designed only for Hazer machines. The Fazer can operate using only fog fluids or fluids recommended by your dealer that are designed to be used exclusively in the Antari Z-300 Fazer. Do not allow the Fazer liquid to become contaminated. Contamination includes adding fragrances, oils, dust, or any other foreign materials to the Fazer liquid supply.