Page 3
Precautions for Safety Use Product component Method of Operation How to assemble Tips for Ingredients Selection Maintenance Only Hand Wash & Easy Cleaning Safety Index Warranty Troubleshooting...
Section 2. Product component ⑥ ⑤ ⑦ ⑧ ⑨ ④ ③ ② ① ⑩ ⑪ 1.Power Cable 6.Food Pusher 2.Control panel 7.Auger 3.Main Body 8.Filter 4.Locking Button 9.End Cap 5.Feeding Chute 10.Pulp Container 11.Juice container...
Page 8
Reverse: This function can be used when pulp discharge is blocked or the motor is locked. Modes runs from 100 to 110 RPM for hard fruits like apple, pear, carrot, beets, ginger and kale. Modes runs from 70 to 90 RPM for soft and juicy fruits and vege- tables like watermelon, orange, grape, celery, cucumber.
Page 9
TIPS: In the case of clogging 1.The first time, you don't need to do anything --- the juicer will stop for 3 seconds --- then reverse for 10 seconds --- stop for 3 seconds --- and finally run forward. 2.If the juicer is blocked again, repeat the first step, then stop for 3 seconds---reverse for 10 seconds---the display screen will flash and the juicer will stop.
Page 10
Insert the end cap ,rotate anticlockwise until aligning“ ”on end cap with“ ”on the juicing body.
Page 11
Put food ingredient into the Feeding Chute and push the items down with the food pusher.
Page 12
Cut large pieces of fruit into smaller pieces as appropriate(less than 2.75 inches/7cm). Select fresh fruits and vegetables, which contain more juice. The proper fruits include: pineapple, beet root, celery stalk, apple, cucum- ber, spinach, melons, tomato, orange and grape. Tips: 1.Any hard core,seed,skin or shell from fruits shall be removed in advance.
Page 13
Cut it into strips (less than 2.75 inches/7cm). Wheatgrass, kale, cabbage, spinach, and pine tree needles are just some of the natural products that can be juiced with the AMZCHEF juicer. Enjoy the best that nature offers in raw foods of all kinds and juice them for full nutritional benefits.
Page 14
Take out the plunger Press and hold the locking button on the side of the Juicing Body, and start rotating it clockwise to remove it form the Main Body. The accessories cannot be removed if the button is not pressed. After detaching the Jucing body, take out the tray,the juice strainer (or the end cap) and the auger in order.
Need help?
Do you have a question about the ZM1517 and is the answer not in the manual?
Questions and answers