CONTENT Chapter I. Precautions for Safe Use Chapter II. Parts and Functions Chapter III. Assembly and Disassembly Methods Chapter IV. Methods of Operation Chapter V. Ingredient Selection and Handling Tips Chapter VI. Cleaning Guidelines and Maintenance Chapter VII. Troubleshooting Chapter VIII. Safety Indexes Chapter IX.
Chapter I. Precautions for Safe Use All users of this appliance must read and understand these safety precau- tions before operating. SIGN SAMPLES 1. DO NOT PLUG IN OR UNPLUG WITH WET HANDS. 2.DO NOT USE WITH OTHER THAN RATED VOLTAGE. 3.
Page 4
6. DO NOT MOISTEN THE BASE OR SPLASH WATER ON THE BASE. 7. WHEN THE POWER CORD, WIRE IS BROKEN OR DAMAGED OR THE PLUG-IN. PART BECOMES LOOSE, DO NOT OPERATE IT. 8. ALWAYS USE AN OUTLET WITH A GROUND CONNECTION. To be safe, always use an outlet with a ground connection, but never ground on gas lines, plastic water pipes, telephone lines, etc.
Page 5
1. Before use, please check if the power cord, the plug, the juice strainer, the spiral pusher and any other part is damaged. If any of the said part is damaged, stop using the appliance and contact our customer service department promptly. Do not dismantle and repair it by yourself, otherwise dangers may happen.
Chapter II. Parts and Functions ⑧ ⑩ 13 ⑨ ⑦ ⑥ ⑤ ④ ③ ② ① Component Function Description Name For connection to power supply. Power Cable ① The main unit containing motor and other components, provid- ing power output. Housing ②...
Chapter III. Assembly and Disassembly Methods 1. Assembly Guide Before starting assembly, set the machine mode to [O] (off state) and unplug it. Install the Drum on the housing, and turn it counter- clockwise until you hear a "click". Insert the Auger into the Drum until it is fixed.
Page 8
Put the Juice Container and Pulp Conatiner in the corresponding positions. Plug the juicer into the power supply, press the Mode Switch to start using. 2. Disassembly Guide Before starting disassembly, make sure the device is unplugged and the mode switch is set to off. Please remove the tray first.
Remove Filter and Auger step by step. Chapter IV. Methods of Operation Power on “ON” Off “O” Reverse mastication (For solving ingredient clogging “REV” problems) Chapter V. Ingredient Selection and Handing Tips 1. How to choose ingredients? • Please avoid foods that you are allergic to. •...
4. How to increase the juice yield? • Soft fruits (e.g. grapes and watermelon) are easy to stuck in the juicer, please reduce the feeding speed. Or mix it properly with hard fruits before feeding. • If you need to extract a large amount of juice, please repeat the steps of "cleaning-juicing-clean- ing"...
Do not immerse the motor base in water or other liquids. 2. Tips for maintenance • After cleaning the accessories, let dry completely then assemble and place in a cool and dry place. • The machine needs to rest every 10 minutes to protect the motor. •...
Need help?
Do you have a question about the ZM1501 and is the answer not in the manual?
Questions and answers