Springdale Lighting SD-TL-H-SPC Assembly Instructions

This is a generic illustration and may not be identical to your lamp.
1. Place the base (A) on a level surface.
2. Insert the bulb into bulb socket (C).
3. Pinch the two wire springs (B) together and place shade
(D) over the base.
Place the top over the glass and tighten
screws (J) to secure.
4. Insert the harp (F) until it sits firmly into the saddle (E.
5. Adjust the knurl nut (G) on harp (F).
This can be used to raise the shade a little if
necessary.
6. Place the shade (H) over the end of the harp (E) and
tighten the finial (I) securing the shade in place.
7. Insert the bulb into the bulb socket.
Important:
Check the lamp socket for information on the maximum wattage
recommended for your specific lamp.
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth. Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
Basic Table Lamp
ASSEMBLY INSTRUCTIONS:
Version#:SD-TL-H-SPC
Made in China / Revision 06/08/1