Springdale Lighting SD-TL-SA Assembly Instructions

Basic table lamp

This is a generic illustration and may not be identical to your lamp.

1. Place the lamp base on a level surface.

Screw the socket assembly (B) into the base (A).

3. Insert harp (D) into the saddle (C) until it sits firmly

into the saddle.

4. Place the shade (E) over the harp (D), and tighten

with the finial (F) securing the shade in place.

5. Insert the bulb into the bulb socket.

Important:

Check the lamp socket for information on the maximum wattage

recommended for your specific lamp.

Unplug lamp, wipe with a damp cloth. Do not use abrasives

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Basic Table Lamp

ASSEMBLY INSTRUCTIONS

Version#: SD-TL-SA

Made in China Revision – 01/04/16

Table of Contents

Need help?

Do you have a question about the SD-TL-SA and is the answer not in the manual?

Page 1 Cleaning of your lamp. Unplug lamp, wipe with a damp cloth. Do not use abrasives *SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. FOR RETURN SHIPPING PURPOSES: Version#: SD-TL-SA PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. Made in China Revision – 01/04/16...
Page 2 Limpieza de lampara Desenchufe la lámpara, limpiar con un trapo húmedo. No utilice los abrasivos. *Guardar estas instructiones para una referencia futura. Version#: SD-TL-SA PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL PARA REDUCIR DAÑOS MINIMO.