Advertisement
Available languages
Available languages
Table of Contents
This is a generic illustration and may not be identical to your lamp.
1. Place the lamp base on a level surface.
2. Screw the threaded rod (B) into socket assembly (A).
3. Adjust the knurl nut (C) onto the threaded rod (B).
This can be used to raise the shade a little if necessary.
• Fabric shaded lamps do not have a knurl nut.
4. Place shade (D) over threaded rod (B), and tighten finial (E)
securing the shade in place.
5. Insert bulbs into the bulb socket.
6. Turn on the lamp by using pull chains OR switch in line.
• Your lamp will have either pull chains or a line switch.
Important:
Check the lamp socket for information on the maximum wattage
recommended for your specific lamp.
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth. Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
Basic Table Lamp
ASSEMBLY INSTRUCTIONS
Version#: SD-TL-P
Made in China / Revision 08/09/16
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Springdale Lighting SD-TL-P
Summary of Contents for Springdale Lighting SD-TL-P
- Page 1 Cleaning of your lamp. Unplug lamp, wipe with a damp cloth. Do not use abrasives *SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. FOR RETURN SHIPPING PURPOSES: Version#: SD-TL-P PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. Made in China / Revision 08/09/16...
- Page 2 Limpieza de lampara Desenchufe la lámpara, limpiar con un trapo húmedo. No utilice los abrasivos. *Guardar estas instructiones para una referencia futura. Version#: SD-TL-P PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL PARA REDUCIR DAÑOS MINIMO.
Need help?
Do you have a question about the SD-TL-P and is the answer not in the manual?
Questions and answers