Springdale Lighting FTT10004 Assembly Instructions

Available languages

ASSEMBLY INSTRUCTIONS:

Item No: FTT10004

Place the lamp on a level surface.

Screw socket assembly into the base.

Pull balance of cord from base to tighten excess.

Insert the harp until it sits firmly into the saddle.

Adjust the knurl nut on harp. This can be

used to raise the shade a little if necessary.

Place the shade over the end of the harp and tighten

with the finial securing the shade in place.

5. Insert 60Watt bulb into bulb socket.

Uses (1) Maximum 60WATT Type "A" Bulb.

(Bulb not included).

Cleaning of your lamp

Unplug lamp, wipe with damp cloth.

Do not use abrasives.

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Revision – 03/21/11

Table of Contents

Do you have a question about the FTT10004 and is the answer not in the manual?

Page 1 FOR RETURN SHIPPING PURPOSES: ASSEMBLY INSTRUCTIONS: PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. Item No: FTT10004 Place the lamp on a level surface. Screw socket assembly into the base. Pull balance of cord from base to tighten excess. Insert the harp until it sits firmly into the saddle.
Page 2 INSTRUCIONES DE ASAMBLEA: PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL Modelo: FTT10004 PARA REDUCIR DAÑOS MINIMO. 1. Ponga la base en una superficie llana. Atornille la asamblea de bombilla en la base. Jale el balance de la cuerda de la base para apretar exceso.