Springdale Lighting SD-TL-H Assembly Instructions

This is a generic illustration and may not be identical to your lamp.

1. Place the base on a level surface.

2. Insert the harp (B) until it sits firmly into the saddle (A).

3. Adjust the knurl nut (C) on harp (B).

This can be used to raise the shade a little if necessary.

• Fabric shaded lamps do not have a knurl nut.

4. Place the shade (D) over the end of the harp (B)

and tighten with the finial (E) securing the shade in place.

5. Insert the bulb into the bulb socket.

Check the lamp socket for information on the maximum wattage

recommended for your specific lamp.

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth. Do not use abrasives

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Basic Table Lamp

ASSEMBLY INSTRUCTIONS:

Version#:SD-TL-H

Made in China / Revision 08/09/16

Table of Contents

Do you have a question about the SD-TL-H and is the answer not in the manual?

Page 1 Cleaning of your lamp. Unplug lamp, wipe with a damp cloth. Do not use abrasives *SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. FOR RETURN SHIPPING PURPOSES: Version#:SD-TL-H PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. Made in China / Revision 08/09/16...
Page 2 Limpieza de lampara Desenchufe la lámpara, limpiar con un trapo húmedo. No utilice los abrasivos. *Guardar estas instructiones para una referencia futura. Version#:SD-TL-H PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL PARA REDUCIR DAÑOS MINIMO.