SSV Works MRB3 User Manual page 5

SSVWORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com
I
Phone: 818-991-1778
I
Fax: 866-293-6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects
in material or workmanship. All SSVWorks Electronics are covered by a limited 1 year
warranty against defects in material or workmanship. All SSV Works Speakers are
covered by a limited 1 year warranty against defects in material or workmanship. Labor
for replacement of defective components is not covered. Contact SSV Works for further
warranty information.
WP3-RZF304A
4 Seat RZR XP1000 & 2015+ RZR900
4 Speaker Overhead WP System
A
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
TOOLS NEEDED FOR INSTALLATION
PARTS LIST
-Wire Crimpers
- 13mm Wrench for Battery 1. WP-RZF3O4
x
1
5.
Fuse Holder with Fuse
Terminal
Crimp on ring terminal
-Wire Strippers
2. M6
x 1.0 Screws x 12
6.
-
- #3 Phillips Screwdriver
3. M6 Washers x 12
7. Zip Ties
4.
Mounting Brackets
x
2
PARTS LIST IMAGES
1. WP-RZF3O4 2. M6 x 1.0 Screws x 12 3. M6 Washers x 12 4. Mounting Brackets x 2
5. Fuse Holderwith Fuse 9. Crimp on ring terminal 10. Zipties
INSTALLATION NOTES
To make wiring easier, locate the battery in the vehicle before beginning the installation. The use of a thread locker is recommended on all
screws to prevent loosening due to vibration.