Venturo HT60KX Series Parts & Installation Manual
  1. Manuals
  2. Brands
  3. Venturo Manuals
  4. Construction Equipment
  5. HT60KX Series
  6. Parts & installation manual

Venturo HT60KX Series Parts & Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
PARTS &
INSTALLATION MANUAL
HT60KX SERIES
Included in this manual:
HT60KX (VLC)
• 10,000 lb Hydraulic Telescopic Service Crane
• Venturo Logic Control System (VLC-H / VLC-K) w/ Proportional Control
• 25 or 30 ft Fully-Powered, Two-Stage Boom Extension
VENCO VENTURO INDUSTRIES LLC
12110 BEST PLACE | CINCINNATI, OHIO 45241
This manual also available online at www.venturo.com.
INST-28459
HWBA*C-V*A0
800-226-2238

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HT60KX Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Venturo HT60KX Series

Summary of Contents for Venturo HT60KX Series

  • Page 1 Included in this manual: HT60KX (VLC) • 10,000 lb Hydraulic Telescopic Service Crane • Venturo Logic Control System (VLC-H / VLC-K) w/ Proportional Control • 25 or 30 ft Fully-Powered, Two-Stage Boom Extension VENCO VENTURO INDUSTRIES LLC 12110 BEST PLACE | CINCINNATI, OHIO 45241 800-226-2238 This manual also available online at www.venturo.com.
  • Page 3 SAFETY DECALS DRAWING & LIST 22181C SAFETY DECALS DRAWING & LIST 28443 SAFETY DECALS DRAWING & LIST 28425 DECALS; BOOM CAPACITY 23748 DECALS; VENTURO LOGIC CONTROLS (VLC) 7607200A SECTION 200: INSTALLATION 28458 CRANE INSTALLATION, PG. 1 23806 CRANE INSTALLATION PG. 2 20051...

  • Page 5: Specifications

    SECTION 100 DESCRIPTION & SPECIFICATIONS VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO 7607100A...

  • Page 6: Installation Dimensions

    CENTER OF ROTATION OVERALL LENGTH: RETRACTED = 13' - 9 " EXTENDED = 26' - 9 " THIS SECTION SCALED 2:1 FOR CLARITY TITLE DATE SECTION C100 INSTALLATION DIMENSIONS 11-18-22 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28419 HT60KX-25' SERIES CRANES...
  • Page 7 29' - 10 " THIS SECTION SCALED 2:1 FOR CLARITY OVERALL LENGTH: RETRACTED = 15' - 9 " EXTENDED = 32' - 1 " TITLE DATE SECTION C100 INSTALLATION DIMENSIONS 11-29-22 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28420 HT60KX-30' SERIES CRANES...
  • Page 8 F R O N T O F C R A N E " " " " 22" 19 " " TITLE DATE SECTION C100 BASE MOUNTING DIMS 11-10-22-A VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 23802 HT60/66KX VLC SERIES 02-06-19...
  • Page 9 HT60KX, 12' - 18.5' - 25' BOOM, WITH VENTURO LOGIC CONTROL SYSTEM CRANE SERIAL NUMBER: ____________________ MAXIMUM LOAD CAPACITY CHART 7600 6100 4275 3325 10000 8400 2775 5950 4675 2450 3925 10000 10000 9750 3475 7700 2250 6525 3200 5800...
  • Page 10 HT60KX, 13' - 22' - 30' BOOM, WITH VENTURO LOGIC CONTROL SYSTEM CRANE SERIAL NUMBER: ____________________ MAXIMUM LOAD CAPACITY CHART 6350 5050 3600 2775 8900 7125 2325 5100 3975 2050 3350 10000 10000 8625 2950 6800 1875 5750 2725 5100...
  • Page 11 SECTION 150 SAFETY VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO 7607150A...

  • Page 12: Electrocution Hazard

    NOTE: ENVIRONMENTAL CONDITIONS SUCH AS FOG, SMOKE, OR PRECIPITATION MAY REQUIRE INCREASED CLEARANCES TITLE DATE SECTION ® HAZARD APPS & INFO C150 02-21-14M VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 15394 ET/HT CRANES 12-20-13L...
  • Page 13 CHART). ADDITIONAL CLEARANCES ARE REQUIRED FOR VOLTAGES IN EXCESS OF 50,000 VOLTS. REFER TO DRAWING 15394 FOR ADDITIONAL INFORMATION. DEATH OR SERIOUS INJURY WILL RESULT FROM CONTACT OR INADEQUATE CLEARANCE. TITLE DATE SECTION ® CRANE SAFETY & HZRDS C150 02-21-14D VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 920612 HYDRAULIC CRANES 04-04-12C...
  • Page 14 ASSIST WIRE ROPE CLAMP IN HOLDING LOAD WARNING · Winches are not to be used to lift, support, or otherwise transport personnel TITLE DATE SECTION ® WINCH SAFETY C150 02-21-14D VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 19217 HT CRANES 04-04-12C...
  • Page 15 FUNCTION: To inform the operator of manual overide locations. BOOM BOOM QUANTITY: PLACEMENT: Inside of rear cover. BOOM BOOM DOWN TITLE DATE SECTION DECAL DRAWING & LIST C150 11-30-22E VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 22181A HT40/50/60/66 SERIES 02-21-14D...
  • Page 16 To inform the operator of OF CRANE FUNCTIONS, manual override locations. REMOVE REAR COVER AND SEE INSTRUCTIONS QUANTITY: INSIDE. 20834-B PLACEMENT: Inside rear cover. TITLE DATE SECTION DECAL DRAWING & LIST C150 04-14-23H VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 22181B HT40/50/60/66 SERIES 11-30-22G...
  • Page 17 PART NO.: 22499 DECAL: KNOW YOUR SIGNALS FUNCTION: To inform the operator of proper signals. QUANTITY: 1 PLACEMENT:Right side of rear cover. TITLE DATE SECTION DECAL DRAWING & LIST C150 11-30-22F VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 22181C HT40/50/60/66 SERIES 02-21-14E...
  • Page 18 PLACEMENT: In prominent location, so it is easily seen and readily ZONE 7 ZONE 4 identifiable. ZONE 6 ZONE 5 20927 TITLE DATE SECTION DECAL DRAWING & LIST C150 03-22-23 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28443 HT60 SERIES...
  • Page 19 I N T E N T I O N A L L Y L E F T B L A N K TITLE DATE SECTION C150 BOOM CAPACITY DECALS 11-10-22 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28425 HT60KX VLC SERIES...
  • Page 20 23742 DECAL: VLC, 2.94" x 6.00" FUNCTION: To show that the crane is equipped with Venturo Logic Controls QUANTITY: 2 each PLACEMENT: Each side of Housing S P A C E I N T E N T I O N A L L Y...

  • Page 21: Installation

    SECTION 200 INSTALLATION VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO 7607200A...
  • Page 22 400 degree rotation range -- regardless of the final position of the boom during storage/travel. See installation pages 22913 for more information on hose connections. TITLE DATE SECTION CRANE INSTALLATION C200 06-26-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28458 HT60KX-25' & -30'...
  • Page 23 If your crane was purchased with optional engine start/stop and throttle control, refer to drawing 22615 in the replacement parts section for further information. TITLE DATE SECTION CRANE INSTALLATION C200 11-10-22B VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 23806 HT60/66 VLC SERIES 05-10-21A...
  • Page 24 STREETSIDE CURBSIDE TITLE DATE SECTION C200 ROTATION STOP LOCATION 03-09-23F VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 20051 05-20-20E...

  • Page 25: Stability Test

    Overview Venturo follows the guidelines of ANSI B30.5 in defining stability. Generally speaking, a truck is considered stable as long as it is not on the verge of tipping - i.e. with the truck level, at least one tire on each corner of the truck must remain in contact with the ground.
  • Page 26 Overview Venturo follows the guidelines of ANSI B30.5 in defining stability. Generally speaking, a truck is considered stable as long as it is not on the verge of tipping - i.e. with the truck level, at least one tire on each corner of the truck must remain in contact with the ground.
  • Page 27 % of Rated Capacity for each of the 10 regions are provided above. CONDITIONS: · STABILIZERS FULLY EXTENDED & DOWN, ON FIRM LEVEL GROUND. TITLE DATE SECTION ® STABILITY CHART C200 05-11-17F VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 20907 VENTURO CRANES 02-21-14E...
  • Page 28 MEASUREMENTS INCLUDE MOUNTING APARATUSES 4" 5.5" 40" 42" 2" 2" 2" 2" 5" 5" 18" 20" MEASUREMENTS EXCLUDE MOUNTING APARATUSES TITLE DATE SECTION ® C200 RESERVOIR DIMENSIONS 02-21-14E VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 22825 HYD. TANKS (25/40 GAL.) 06-04-13D...
  • Page 29 * HOSES AND FITTINGS BETWEEN PUMP, RESERVOIR, AND THE WINCH MUST HAVE AN 'NON-CLOSED CENTER CRANE NOT INCLUDED. UNRESTRICTED PATH TO TANK/ TRANSITION' TYPE. RESERVOIR. TITLE DATE SECTION HYDRAULIC COMPONENT INSTALLATION C200 08-08-23G VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 22883 HT40-66, PROPORTIONAL 11-10-22F...

  • Page 30: Connection Guide

    SELECTOR VALVE MUST BE THE WINCH MUST HAVE AN 'NON-CLOSED CENTER UNRESTRICTED PATH TO TANK/ TRANSITION' TYPE. RESERVOIR. TITLE DATE SECTION CONNECTION GUIDE, PAGE 1 / 2 C200 08-09-23C VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 23015 HT CRANES 02-21-14B...
  • Page 31 INCLUDING HOSE SELECTOR VALVE MUST BE THE WINCH MUST HAVE AN SPECIFICATIONS 'NON-CLOSED CENTER UNRESTRICTED PATH TO TANK/ TRANSITION' TYPE. RESERVOIR. TITLE DATE SECTION CNNCTN GDE, PAGE 2/2 C200 08-08-23C VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 23014 HT CRANES 02-21-14B...
  • Page 32 HOSES TO AUGMENT SWIVELS CAUTION CAUTION SELECTOR VALVE MUST BE CASE DRAIN MUST RETURN 'NON-CLOSED CENTER DIRECTLY TO RESERVOIR TRANSITION' TYPE VALVE. WITHOUT RESTRICTION. TITLE DATE SECTION CONNECTIONS GUIDE C200 08-07-23G VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 22913 HT CRANES 02-21-14F...

  • Page 33: Wire Rope Installation

    SOME WINCHES MAY BE SUPPLIED WITH A HEX NUT IN LIEU OF A WEDGE FOR INSTALLING THE WIRE ROPE. TITLE DATE SECTION ® WIRE ROPE INSTALLTN C200 02-21-14K VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 22245 ET6K & LARGER CRANES 12-26-13J...

  • Page 34: Operation

    SECTION 300 OPERATION & MAINTENANCE VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO 7607300B...
  • Page 35 Inspect sheaves for excessive wear or play. Perform a basic inspection of the winch with each use, monitoring for unusual noise or hydraulic leaks. TITLE DATE SECTION MAINTENANCE INFO C300 06-11-24E VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 23203 HT25/30/40/50/60/66KX(P) 11-10-22D...
  • Page 36 Avoid repeated rapid reversals of the control switches. This can cause the load to swing. Check all control functions to see that they are working as described in the following section. TITLE DATE SECTION CRANE OP / MNTNC INST C200 08-08-23A VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 23753 HT CRANES 10-11-18...

  • Page 37: Control Functions

    VLC OVERLOAD SENSING SYSTEM This crane is equipped with the Venturo Logic Control (VLC) overload sensing system. If the capacity of the crane is exceeded, the "Winch Up", "Boom Down", and "Boom Out" functions will be shut down. The "Winch Down", "Boom Up", and "Boom In"...
  • Page 38 Boom pivot at rear of boom Slew drive (2 zerk fittings) Swing bearing race (1 zerk fitting) Elevation cylinder base and rod pivots TITLE DATE SECTION CRANE OP / MNTNC INST C300 07-08-24B VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28436 HT60/66 VLC SERIES 10-26-23A...
  • Page 39 RIGHT SIDE VIEW MANUAL OVERRIDE SYSTEM Should an electrical failure occur, your Venturo crane can be operated manually. The manual overrides are intended for emergency use only and should not be used for normal operation. To operate in manual override mode:...
  • Page 40 TERMINATES IN 3/8" CLOSED SWAGE SOCKET LOAD BLOCK HOOK: RATING: 5 TONNE (11,023 LBS) DIMENSIONS: COLOR BRAND GOLD CROSBY 2.50" 9.69" 7.50" TITLE DATE SECTION C300 WIRE ROPE & HOOK SPECIFICATIONS 03-21-23 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28421 HT60KX...
  • Page 41 SECTION 400 REPLACEMENT PARTS VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO 7607400A...
  • Page 42 REFERENCE 28514 FOR REPLACEMENT PARTS LIST TITLE DATE SECTION C400 REPLACEMENT PARTS DWG - MECHANISM 07-08-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28513 HT60KX VLC SERIES...
  • Page 43 REPLACEMENT PARTS LIST - HT60KX VLC SERIES; MECHANISM REFERENCE 28513 FOR REPLACEMENT PARTS DRAWING TITLE DATE SECTION C400 REPLACEMENT PARTS LIST - MECHANISM 07-09-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28514 HT60KX VLC SERIES...
  • Page 44 36 13 18 14 14 26 17 34 16 31 30 35 16 REFERENCE 28516 FOR REPLACEMENT FASTENERS LIST TITLE DATE SECTION C400 REPLACMENT FASTENERS DRWNG - MECH 07-09-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28515 HT60KX VLC SERIES...
  • Page 45 HHCS = HEX HEAD CAP SCREW, SHCS = SOCKET HEAD CAP SCREW, PMS = PAN MACHINE SCREW, S/S = STAINLESS STEEL REFERENCE 28515 FOR REPLACEMENT PARTS DRAWING TITLE DATE SECTION C400 REPL FASTENERS LIST - MECHANISM 07-09-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28516 HT60KX VLC SERIES...
  • Page 46 REFERENCE 26952 FOR REPLACEMENT PARTS LIST TITLE DATE SECTION C400 RPLCMNT PARTS DRAWING - 26951 BOOM 06-11-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 26951 HT40/45/50/60 - 25'...
  • Page 47 WIRE ROPE; 100 FT, NO HOOK (HT60) 24916-3/8-100 ASS'Y; WORK LIGHT, LED 27483 REFERENCE 26951 FOR REPLACEMENT PARTS DRAWING TITLE DATE SECTION C400 REPLACEMENT PARTS LIST - 26593 BOOM 06-11-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 26952 HT40/45/50/60 - 25'...
  • Page 48 REFERENCE 26954 FOR REPLACEMENT PARTS LIST TITLE DATE SECTION C400 RPLCMNT FASTENERS DRWNG - 26593 BOOM 06-11-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 26953 HT40/45/50/60 - 25'...
  • Page 49 REFERENCE 26953 FOR REPLACEMENT FASTENERS DRAWING HHCS = HEX HEAD CAP SCREW PMS = PAN MACHINE SCREW S/S = STAINLESS STEEL TITLE DATE SECTION C400 PLCMNT FASTENERS LIST - 26593 BOOM 06-11-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 26954 HT40/45/50/60 - 25'...
  • Page 50 REFERENCE 26956 FOR REPLACEMENT PARTS LIST TITLE DATE SECTION C400 REPL PARTS DWG, 30' BOOM, 26590 06-11-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 26955 HT45/60 - 30'...
  • Page 51 REPLACEMENT PART LIST, 30' BOOM 26590 REFERENCE 26955 FOR REPLACEMENT PARTS DRAWING TITLE DATE SECTION C400 REPL PART LIST, BOOM 26590 06-11-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 26956 HT45/60 - 30'...
  • Page 52 16 17 REFERENCE 26958 FOR REPLACEMENT FASTENERS LIST TITLE DATE SECTION C400 REPL HARDWARE DWG, 30' BOOM 26590 06-11-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 26957 HT45/60 - 30'...
  • Page 53 REPLACEMENT FASTENERS LIST, 30' BOOM 26590 REFERENCE 26957 FOR REPLACEMENT FASTENERS DRAWING TITLE DATE SECTION C400 REPL FAST LIST, BOOM 26590 06-11-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 26958 HT45/60 - 30'...
  • Page 54 COMPACT A2B - 27469-* - REPLACEMENT PARTS LIST 13 12 TITLE DATE SECTION C400 7-10-24A REPLACEMENT PARTS LIST VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 26942 COMPACT A2B - 27469-* 06-11-24...
  • Page 55 It is recommended to actuate the winch up function slowly, which will yield a consistent and repeatable result, in terms of wire rope tension when stowed. Contact Venturo Tech Support for assistance. 1-800-226-2238 ext. 124 TITLE DATE SECTION...

  • Page 56: Hydraulic Motor

    REPLACEMENT PARTS DRAWING; 27274 WINCH 20743 CABLE WEDGE 23877 HYDRAULIC MOTOR WINCH SEALS PACKAGE: 23848 TITLE DATE SECTION C400 REPLACEMENT PARTS DRAWING 11-10-22-C VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 27332 HT60/66KX SERIES CRANES 04-05-21B...
  • Page 58 REPLACEMENT PARTS DRAWING - HYDRAULIC COMPONENTS FRONT FRONT REFERENCE 28518 FOR REPLACEMENT PARTS LIST HOSE ROUTINGS ARE FOR REFERENCE ONLY TITLE DATE SECTION C400 RPLCMNT PARTS DWG - HYD. COMPONENTS 07-09-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28517 HT60/66KX VLC SERIES...
  • Page 59 MANIFOLD (WU/WD PORTS) H6408-10 FITTING; T-SHAPE, 4MJ-4MJ-4MJ 22952, 22953, & 22903 (CASE DRAIN HOSES) H2603-040404 REFERENCE 28517 FOR REPLACEMENT PARTS DRAWING TITLE DATE SECTION C400 REPL PARTS - HYD COMP 07-09-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28518 HT60KX VLC SERIES...
  • Page 60 WINCH RELIEF VALVE 22312-2.25 PRIORITY FLOW VALVE (BOOM EXTENSION) 22873 22312-4.00 VALVE SECTION ASSY PRIORITY FLOW VALVE (BOOM ELEVATION) 22523 VALVE SECTION ASSY TITLE DATE SECTION C400 22736 REPLACEMENT PARTS 04-19-24H VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 22940 HT40/50/60/66KX PROPORTIONAL 11-10-22G...
  • Page 61 +12V WHITE WIRE TO (+) TERMINAL STRIP BLACK WIRE GND BLACK WIRE TO 14-PIN PLUG, A2B WIRE WORK LIGHT TITLE DATE SECTION WORK LIGHT INSTALLATION, 3-WIRE CORD REEL 06-12-24B C400 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28188 VLC CRANES 03-03-23A...

  • Page 62: Wiring Diagram

    BROWN S - ORANGE BLACK GREEN LED R - BLUE BLUE GND (-) LED WARNING LIGHT GRAY (NOT USED) TITLE DATE SECTION C400 WIRING DIAGRAM - PG. 1 06-17-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 26963 VLC-K ("ORANGE") SERIES...
  • Page 63 BROWN AUX 1 Use 19464 Master Switch or Chassis-mounted Accessory A2B (INPUT) PURPLE Switches WHITE AUX 2 BLACK GROUND TITLE DATE SECTION C400 WIRING DIAGRAM - PG. 2 06-17-24 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 26964 VLC-K ("ORANGE") SERIES...
  • Page 64 GND. (-) TERMINAL BLK 1 Supply (+) Inclinometer 2 Supply (-) 3 CAN-H 4 CAN-L 23437 SHOWS RIGHT SIDE OF WIRING DIAGRAM TITLE DATE SECTION C400 WIRING DIAGRAM, PG. 1 07-08-24H VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 23436 VLC-H ("RED") SERIES 06-14-24G...
  • Page 65 12v (+) TERMINAL BLK GND. (-) TERMINAL BLK HORN RELAY GND. (-) TERMINAL BLK HORN 23436 SHOWS LEFT SIDE OF WIRING DIAGRAM TITLE DATE SECTION C400 WIRING DIAGRAM, PG. 2 07-08-24N VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 23437 VLC-H ("RED") SERIES 06-14-24M...

  • Page 66: Winch Motor

    SVD4 3 POSITION - 4 WAY VALVE ROTATION MOTOR CASE DRAIN 0.020 EXTENSION CYLINDER C1030 PRESSURE TRANSDUCER C1030 ELEVATION CYLINDER PRESSURE TRANSDUCER TITLE DATE SECTION C400 HYDRAULIC SYSTEM DIAGRAM 12-04-23D VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 23822 HT60/66KX VLC SERIES 11-22-22C...
  • Page 67 RED - 14 GAGE ELECTRICAL WIRE - 15 FEET LONG 01181 BUSS BAR 22619 BLACK - 16GA WIRE ASSY - 6" LONG W/ 3 INCH PIGTAIL TITLE DATE SECTION ENGINE START / STOP ® C400 THROTTLE CONTROL 06-09-20F VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 22615 HT CRANES 02-21-14E...
  • Page 68 HYDRAULIC RESERVOIR - 25 GAL (18" x 40" x 8") 22998 HYDRAULIC RESERVOIR - 40 GAL (20" x 42" x 11") ITEM PART NUMBERS DESCRIPTION TITLE DATE SECTION RESERVOIR KIT REPL PARTS C400 12-09-22D VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 23224 HT CRANES; 25/40 GAL RESERVOIR 08-04-15C...

  • Page 69: Decal Placement

    U N L AW F U L T O O PE R AT E T H IS EQ U IPM E N T GREASE GREASE WITHIN 20 FEET OF HIGH-VOLTAGE LINES OF 350,000 VOLTS OR LESS. 14473-3 15401 GREASE GREASE GREASE 14473-3 TITLE DATE SECTION C400 DECAL PLACEMENT 11-10-22 VENCO VENTURO INDUSTRIES LLC CINCINNATI, OHIO SUPERSEDES 28442 HT60KX VLC SERIES...
  • Page 70 24911 FIELD SERVICE LABEL KIT; HT60KX PART # DESCRIPTION DECAL; HORN RELAY 19814-1 DECAL; WORK LIGHT RELAY 19814-2 DECAL; VENTURO LOGO, MEDIUM 17389 DECAL; MODEL NAME, HT60 24912 DECAL; VLC MODEL SERIES 23742 DECAL; BOOM CAPACITY, 12-18.5-25, RIGHT 24914-R DECAL; BOOM CAPACITY, 12-18.5-25, LEFT 24914-L DECAL;...
  • Page 72 1-Year Limited Warranty Policy This limited policy warrants new products of Venturo to be free from defects in material and workmanship for a period of one (1) year from date of original installation. OEM products or accessories purchased by Venturo as part of or offered with our product will carry the OEM manufacturer’s respective warranty.

Table of Contents