Advertisement

Terms of Use
• Please read this guide carefully and keep it for future reference.
• Follow all instructions for safe use of the product and handle with care.
• Use the camera within within given temperature, humidity, voltage level
noted in the specifications. And only use accessories approved by the
manufacturer.
• Do not disassemble the camera.
• Avoid facing the camera directly to sunlight or strong light sources.
• Periodic cleaning may be required. Use a damp cloth only. Do not use any
harsh chemical cleaners.
Disclaimer
• This camera requires a specified UL/CSA approved power supply.
• Use of a non-regulated, non-conforming power supply can damage the
product and void the warranty.
• Do not submerge the camera in water. It is recommended to install it in a
concealed location.
• Recordings without consent are illegal in some jurisdictions.
ZOSI
assumes no responsibility for any use of the product that does not comply
with local laws.
• The camera includes an IR CUT that clicks when the camera switches
between day/night vision modes. This sound indicates that the camera is
working.
1
English

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C296 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ZOSI C296

  • Page 1 • Do not submerge the camera in water. It is recommended to install it in a concealed location. • Recordings without consent are illegal in some jurisdictions. ZOSI assumes no responsibility for any use of the product that does not comply with local laws.
  • Page 2: What's In The Box

    What’s in the Box Mounting Screws×1 Camera×1 Power Adapter×1 Mounting Templates×1 Waterproof Lid×1 Warning Stickers×1 Quick Start Guide Quick Start Guide×1 NOTE: The actual product may vary in appearance. English...
  • Page 3: Camera Introduction

    Camera Introduction Antenna Speaker Network Indicator Infrared Lights Lens Built-in Mic Warm Lights Micro SD Card Slot Reset Button (Press and hold for 5 seconds to reset the camera to factory settings.) Power Port Network Port English...
  • Page 4: Connection Diagram

    Ethernet cable or directly connect to WIFI for device connection. Set up the Camera Download and launch the Zosi Smart App or client software and follow the on-screen instructions to complete the initial setup.
  • Page 5: Install The Camera

    Install the Camera 1. Installation precautions • Do not face the camera to any light source. • Do not point the camera at glass windows or reflective objects. Otherwise, it may result in poor image performance due to reflections from infrared LEDs, ambient lights or status lights.
  • Page 6 3. Installation Distance, Height and Angle Distance: Best accuracy for objects within 5-50 ft (1.5-15 m). Angle: Tilt the camera down about 30°-60°from the horizontal position. Height: Install the camera 8-16 ft (2.5-5m) above the ground. NOTE: The accuracy of human detection will be affected by various factors, such as the distance between the person and the camera, the height of the person, the height and angle of the camera, etc.
  • Page 7 WiFi signal, • Check whether the device version is the latest version. If not, please update to the latest version; If the problem persists, please contact Zositech Support: https://support.zositech.com 4. Does the camera support motion detection and image  capture It captures images automatically when people, cars, are detected or when there is a  change in detected images. Users can also manually capture images using our ZOSI  Smart APP. English...
  • Page 8: Notification Of Compliance

    (2) This device must accept any interference received, including interference that may cause undesired operation. 2. CE Simplified EU Declaration of Conformity ZOSI declares that product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. POE cameras comply with Directive 2014/EU.
  • Page 9 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 10 RF Exposure Warning Statements: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-ex- empt RSS(s).

This manual is also suitable for:

1nc-2965yIpc-2965y

Table of Contents