SOMFY SONESSE 30 WIREFREE Quick Programming Manual

QUICK PROGRAMMING GUIDE FOR
SONESSE® 30 WIREFREE (LI-ION) RTS MOTORS
STEP 1: COMMISSIONING
WAKE UP THE DRIVE by briefly pressing
the motor head programming button or
plugging in the charger.
The shade will briefly jogs three times.
To avoid accidental programming of drive(s) once awake, follow
section "Activate/Deactivate "RTS" when control point is temporarily
preprogrammed (not paired) to the window covering to deactivate
RTS.
PRE-PROGRAMMING THE TRANSMITTER
Press the UP and DOWN simultaneously:
the shade jogs and the control is temporarily
programmed to the shade.
CHECKING THE ROTATION DIRECTION
Press and hold UP, the product should go up.
If window covering does not correspond with
UP and DOWN - REVERSE the output direction,
by pressing and holding the MY button until
the window covering jogs. Output direction should now correspond.
SETTING LIMITS
Setting the Upper Limit
1) Press the UP button to move the shade
to the desired UPPER position. Adjust using
the UP or DOWN buttons.
2) Press and hold the MY and DOWN
simultaneously and release once the shade jogs.
The UPPER limit is now memorized.
Setting the Lower Limit
1) Press the MY button when the shade
reaches the desired LOWER position.
Adjust using the UP or DOWN buttons.
2) Press the MY and UP simultaneously
and release when the application jogs.
The LOWER limit is now memorized.
To confirm and complete limit programming
press and hold the button until the shade jogs.
(The end limits can be set in any order)
54
3x