Related Manuals for PIAB P6040
Summary of Contents for PIAB P6040
- Page 1 Manual Manual P6040 P6040 Function V30, ES Vacuum, ES Blow Function V30, ES Vacuum, ES Blow...
- Page 2 This manual is available in the following languages at piab.com Chinese English French German Italian Japanese Korean Polish Portuguese Russian Spanish Swedish Page 2/12 Page 2/12 P6040 V30 Manual...
-
Page 3: Table Of Contents
2.4 Misuse......6 3. Introduction to P6040 V30 ..6 3.1 Manufacturer. -
Page 4: Introduction To The Manual
Note! Information that needs extra attention! 1.1 About the manual P6040 V30 is used in applications where a constant Wear eye protection vacuum pressure is desired. The manual is available for download at piab.com in the 12 languages shown on page 2. -
Page 5: Safety
Maintenance must be carried out in accordance with implementation in industrial systems; therefore, it the instructions in this manual. Prior to any must not be used with conditions other than those maintenance work, suspend pneumatic/electrical specified herein. supply, and discharge residual pressure. Page 5/12 P6040 V30 Manual... -
Page 6: Intended Use
On/Off and ES • Do not use blow-off functions or ejector exhaust for pressurizing components such as • The P6040 Function Valve V30 is used for On/ cylinders and/or tank-volumes. Off control. • Do not use compressed air pressure or electrical •... -
Page 7: Connections
Pin 1, 24 VDC On/Off Electrical connection DIN43650 Pin 2, GND C-8 mm Function ES Blow Connector Pin 1, 24 VDC M8 3-pol, Pin 4, Signal vacuum/ pressure Pin 3, GND switch Figure 3 Pneumatic diagram. Page 7/12 P6040 V30 Manual... -
Page 8: Technical Data
Safety classification Current consumption Ripple Power Function ES Blow Unit Value Signal range -kPa 15–100 Hysteresis 1-99 Voltage Safety classification Current consumption Ripple Power Function Spare parts Art no Function V30 0117783 Function ES Vacuum 0117784 Page 8/12 P6040 V30 Manual... -
Page 9: P6040 Es Programming Steps, Vaccuum/Blow
P6040 ES programming steps, Vaccuum/Blow 6. P6040 ES programming steps, Vaccuum/Blow Measure mode OUT 1 mode setting Figure 4 Measure mode. Figure 6 OUT 1 mode setting. – Press (Set) button for more than 3 sec. – Use buttons to set Out1 mode. - Page 10 P6040 ES programming steps, Vaccuum/Blow Response time setting Measure Mode Figure 8 Response time setting. Figure 10 Measure mode. – Use buttons to set response time. (2.5, 24, 192 and 768 mS.) Set to 192 mS Pressure setting mode (Hysteresis)
-
Page 11: Warranty
The warranty does not apply to any Product sure that a minimal environmental footprint is used. (including any component or other parts in such Piab is certified against with ISO-14001, and also Products (such as suction cups, filter elements, complies with REACH (EC 1907/2006). - Page 12 +33 (0)16-430 82 67 +46 (0)8-630 25 00 +55 (0)11-449 290 50 +86 21 5237 6545 +33 (0)16-430 82 67 +46 (0)8-630 25 00 +55 (0)11-449 290 50 +86 21 5237 6545 info-france@piab.com info-sweden@piab.com info-brasil@piab.com info-china@piab.com info-france@piab.com info-sweden@piab.com info-brasil@piab.com info-china@piab.com Mölndal...
Need help?
Do you have a question about the P6040 and is the answer not in the manual?
Questions and answers