Hyundai Telecom HLPC-9006 Installation Manual page 11

현대통신(주)
7.2. Installation Condition
1) The ambient temperature range of the system is -20℃ ~ 70℃ and 18℃ ~ 26℃ is
recommended and the recommended Humidity is 20% ~ 70%.
2) Keep clean the installation location and avoid direct sunlight.
3) Do not install the device at the location which dropped or splashing water and beware
of the humid place.
4) It must be no effect on temperature and humidity or strong magnetic device near the
installed device.
5) Select the installation position to minimize wiring length.
6) The LCD of the device has an angle of view, so the screen differs depending on the
viewing angle.
7) AC 220V is used for power and all wiring conditions must be checked before turning
on the power switch. (Be sure to connect the protective earth.
8) This device is a permanent connection device and it should be installed where each
pole of the main power switch has a contact gap of 3 mm or more and it performs a
main power shut-off device.
7.3 Back Box.
1) HLPC-9006 main unit back box: it is the same as the HLPC-9004 backbox.
7.4 Positioning of a backbox.
HSA-0705-01-04(Φ)
년월일
문서번호:
2020. 11. 05.
A4(210×297 ㎜)
AA35MIxxxx
HYUNDAI TELECOM CO., LTD.
페이지
변경코드
11/12
REV.00