Table of Contents
Advertisement
Operation Guide
Thermostat switch
Vertical Airflow Direction Vane (Airflow
direction adjustment Up-and-Down)
The Vertical Airflow Direction Vane is
manually controlled by positioning the
vane to discharge the air upward,
downward or straight out.
Note:
It is advisable not to keep horizontal flap at downward position for a long
time in COOL or FAN mode, otherwise , condensate water might occur.
Don't move the vertical flap with hand in order to avoid the vertical flap
abnormal, using the remote controller to adjust the move of vertical flap.
CAUTION
In cooling mode, after you turn thermostat switch counter-clockwise,
do not turn it back until at least 3 minutes have elapsed.
Otherwise, the fuse may blow due to overload.
Do not exceed the selection range.
This switch controls the preset indoor temperature
to make the air conditioner start or stop automatically,
so as to reduce power consumption and operate the
system both comfortably and economically.
Remark:
The compressor stops running when the
set temperature is reached but the fan
continues to operate to keep an even
indoor temperature.
5
Vertical airflow direction
Advertisement
Table of Contents
