Bullard Free-Air EDP10 Instruction Manual

EDP10
EDP1050HZ220V
This Manual provides detailed instructions, warnings and
other information for individuals using Bullard Free-Air
Pump models EDP10 and EDP1050HZ220V.

TABLE OF CONTENTS

GENERAL INFORMATION ....................................................... 1
WARNINGS ................................................................................ 2
BREATHING AIR REQUIREMENTS .......................................... 3
ASSEMBLING THE FREE-AIR PUMP
OPERATING THE FREE-AIR
MAINTAINING THE FREE-AIR PUMP ....................................... 7
FREE-AIR PUMP TROUBLE SHOOTING GUIDE ................... 7,8
REPLACEMENT PARTS ............................................................. 9
AIR FILTER REPLACEMENT SCHEDULE ................................ 10
WARRANTY & RETURN AUTHORIZATION ........................... 12

GENERAL INFORMATION

Bullard Free-Air pumps transfer ambient air from a clean
air environment containing at least Grade D breathable air
to workers wearing Type C or CE continuous-flow supplied
air respirator hoods or tight-fitting half or full face masks.
Bullard Free-Air pumps MUST be located in an environment
containing at least Grade D breathable air at all times. These
pumps do NOT create Grade D breathable air.
The ambient air is filtered through a medium efficiency inlet
air filter and a Carbofine outlet filter before entering the
respirator's air supply hose.
Bullard Free-Air pumps are oil-less and have rotary carbon
vanes. They produce no carbon monoxide, oil vapors, oil
mist or moisture. They do not require expensive carbon
monoxide monitors, high temperature alarms or associated
airline filters. No calibration is required.
The pumps will supply air to one worker. The chart below
describes the pump model, the number of respirators each
unit will supply and its maximum outlet pressure.
Pump Model
No.
EDP10/
EP1050HZ220V
* USE ONLY SUPPLIED-AIR RESPIRATORS THAT ARE
APPROVED BY MSHA/NIOSH TO OPERATE AT LESS THAN 15
PSIG
www.bullard.com
EDP10 and EDP1050HZ220V
Free-Air® Pumps
Instruction Manual
Model EDP10 ............................................................ 3
Model EDP1050HZ220V .......................................... 3
Pump Performance Specifications ........................ 4
Electric Motor Specifications .................................. 4
PUMP ...................................... 5,6
®
PUMP SPECIFICATION TABLE
Maximum Number of Respirators
Hood Style
One
Full or Half- Maximum
Mask Outlet
Air Pressure*
One 15 psig (1.03
bar)