Bullard ICE User Manual

GENERAL INFORMATION

The Bullard ICE pump transfers ambient air from a clean air location,
where breathable air can be assured at all times, to workers wearing
Type C or CE continuous flow supplied air respirator hoods or tight
fitting half- or full-face masks.
The ambient air is filtered through a medium efficiency inlet air filter
and an inline 90 micron outlet filter before entering the respirator's
air supply hose.
Bullard ICE pumps are oil-less and have reciprocating pistons. They
produce no carbon monoxide, oil vapors, oil mist or moisture. They do
not require expensive carbon monoxide monitors, high temperature
alarms or airline filters. No calibration is required.

TABLE OF CONTENTS

General Information ......................................................................1
Warnings ............................................................................................2
Air Quality .........................................................................................3
Assembling the ICE Pump
Operating the ICE Pump ......................................................................4
Maintaining the ICE Pump ............................................................... 5-6
Replacement Parts ...............................................................................7
This Manual provides detailed instructions, warnings and other information for individuals using Bullard ICE Pump model.
ICE Pump
The chart below describes the number of respirators each unit will
supply and its maximum outlet pressure.
Pump Model No.
ICE PUMP
* Not recommended for respirator assemblies requiring a minimum of
60 psig to operate.
**To convert kPa to bar, divide kPa by 100
Maintenance Service Kits ....................................................................8
Assembly .............................................................................................9
Pump Warranty ..................................................................................10
Air Filter Replacement Schedule ...................................................... 11
www.bullard.com
User Manual
PUMP SPECIFICATION TABLE
Maximum Number of Respirators
Hood Style Full or Half-
Mask
One One
ICE Pump
Maximum
Air Pressure*
Approx. 60 psig
(400 kPa)**