Springlane Sam Instruction Manual page 25

• Release the on / off button to end
the process and wait briefly until the
blending attachment stops moving.
You may then pull the attachment out
of the container.
• Disconnect the power adapter from
the outlet after use.
Tip:
• For your blender to function properly,
you should make sure that the top
of the attachment is sufficiently
covered with food or liquid and that
the maximum filling capacity is not
exceeded.
• Before mixing, cut the food you want
to puree into pieces measuring approx.
2 cm.
WARNING: The blades of
your Sam hand blender are
very sharp. Please use with caution
and never reach into the switched-
on device.
Chopper
The chopper is used for chopping cheese,
nuts, onions, herbs, raw vegetables and
fruits. Frozen foods should be thawed
before shredding. Exceedingly tough
foods like ice cubes, coffee beans etc.
should not be used.
• Carefully remove the plastic protection
from the attachment's blade. Hold it
by the handle at all times.
• Place the blade attachment in the
centre of the mini-foodprocessor
bowl, so that it clicks into place and
the markers face one another. Always
use the anti-slip base along with the
mini-foodprocessor container.
• Fill the jug and close the lid.
• Place the motor housing on the top
of the chopper jug and tighten it until
you hear it click.
• To switch on, use the on/off switch.
Hold the motor housing with one hand
and the chopper jug with the other.
• Be careful not to use the mini-
foodprocessor for more than 10
seconds at a time for more solid foods.
Shred several times.
• To switch off, release the on/off
button, remove the plug from the
socket, ensure that the blades are
no longer rotating and turn the
motor housing to remove it from the
chopper.
• Remove the lid and carefully remove
the blade by its handle.
• Remove the processed foods from the
chopper jug.
Tip:
• First, cut the food you want to process
into pieces measuring approx. 2 cm.
• Do not shred very hard ingredients,
e.g. nutshells, meat with bits of bone
25