Remote Controller Operation - Haier HPU-48HV03 Operation And Installation Manual

Operation
Manual Operation

Remote controller operation

ON
TEMP
ON
OFF
FAN
HEALTH
MODE
SLEEP SWING
CLOCK SET
TIMER
HEAT
RESET LIGHT LOCK
5.Timer setting for TIMER OFF
Press time buttons
6.Time confirming for TIMER OFF
After time setting, press SET button to confirm time.
The control panel will display TIMER.
7.Canel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
According to the time setting sequence of TIMER ON and TIMER OFF, either start-stops or
stops-start can be realized.
If the time setting of TIMER ON is the same as TIMER OFF, TIMER ON-OFF function cannot
be set.
ON/OFF MODE
Set clock correctly before starting TIMER operation
1.Unit start
After unit start, select your desired operation mode (operation
mode will be displayed on LCD)
2.TIMER mode selection
Press TIMER button on the remote controller to change TIMER
mode. Every time the button is pressed, display of TIMER mode
changes as follows:
ON
12:00
AM
TIMER ON TIMER OFF
Then select TIMER ON-OFF mode.
3.Time setting for TIMER ON
Press time button
Every time the button is pressed, time increases 1 minuts.
If the button is kept pressed, time will changes quickly.
Every time the button is pressed, time decreases 1 minuts.
If the button is kept pressed ,time will changes quickly.
It can be adjusted within 24 hours at will.
AM refers to morning and PM refers to afternoon.
4.Timer confirming for TIMER ON
After setting correct time, press
stops to flash, while
Now
ON
and follow the same procedures in " Time setting for TIMER ON"
FAN
TEMP
ON
ON
OFF
12:00 12:00
AM
PM
TIMER ON-OFF
TIMER
OFF
stops to flash.
OFF
11
Timer ON-OFF Function
TEMP TEMP
TIMER
blank
OFF
12:00
PM
will flash.
ON
button to confirm time.
starts flashing.
HEALTH
OFF