Midea MRT21D3BST User Manual page 12

7. Unscrew the screws holding the bottom hinge, then remove the bottom hinge from
the refrigerator.
8. Unscrew the hinge pin from the bottom hinge and reattach it to the other
in the hinge pin, then secure the bottom hinge to the opposite side of the
refrigerator using the screws you removed previously. Remove the hole caps
and plastic bushings from the top of the freezer and refrigerator doors. Save
them for the next step.
9. Insert the hole caps and plastic bushings into the opposite sides (from where
you removed them) of the freezer and refrigerator doors.
Hole caps
EN
10. Remove the door block from the bottom of the refrigerator door and attach it
to the other side.
11. Attach the upper door self-locking block and the door self-closing to the side
of the freezer door where the hinge will be. Use the parts from the hinge kit.
12. Remove the old upper door self-locking block and the door self-closing (do
not remove the parts attached in step 10). Store in a safe place in case you
need to reverse the door position again.
Plastic bushings
Plastic bushings
Upper door
self-locking block
Door self-closing
Door block
Lower door
self -locking block
08
hole
Hole caps