Charging The Shaver - Panasonic ES-PV3A Operating Instructions Manual

Charging the shaver

• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
• Use the specified USB power adaptor and USB cable.
• The USB power adaptor is sold separately.
1
Open the socket
cover and insert
the USB plug
firmly into the
main body and
USB power
adaptor�
2
Insert the USB
power adaptor
firmly into a
household outlet�
• Check that the charge status lamp is glowing.
• Charging is completed after approx. 2 hours.
12
3
Remove the USB power adaptor
from the household outlet, and
remove the USB plug from the
main body after the charge
status lamp turns off.
• Close the socket cover.
1
Note
You cannot operate the shaver while charging.
2
► When the battery capacity is low
1
• The appliance beeps twice after switched off.
• The charge status lamp blinks once
every second when operating the
shaver.
You can shave 2 to 3 times after the
charge status lamp blinks. (This will differ
depending on usage.)
► Notes
• The shaver may be charged with adaptors and cables
other than the specified ones, but Panasonic's
specified adaptor with splash-resistant design and a
USB cable with an overheating protection feature
should be used to ensure safety.
The adaptor is not completely waterproof, so prevent
it from getting wet.
• After charging is completed, turning the power switch
ON with the shaver plugged in will cause the charge
status lamp to light up and then turn off after 5 seconds.