GE AJCH12DC Owner's Manual page 10

Installation Instructions
Install the Air Conditioner in the Case
Remove the locking plate on the front left side.
1
Locking
plate
2 Remove the shipping pad inside the air
conditioner next to the compressor.
3 Carefully slide the air conditioner back into
the case. Make sure that the tubing on the unit
does not touch the wall case and that the case
installation is secure.
10
Shipping pad
4 Reinstall the locking plate with the tab behind
the wall case flange. Tighten the screw.
5 Attach the power cord to the base pan with
the clamp.
Base
pan
6 When the wall outlet is to the left, extend the
cord under the unit and hold it in place with
the clamp.
7 Attach the front grille. An opening for the
power cord is on the bottom of the front grille.
Power
cord
Clamp
Power cord
Clamp