GE AJCH12DC Owner's Manual page 9

Installing a J-Model in an Existing Wall Case
J-Model Qualifying Questions
IMPORTANT!
GE strongly recommends the removal of the
old wall case and the installation of a new
GE Wall Case. If you decide to keep the exist-
ing wall case, you may need a kit to ensure
proper performance. If you DO NOT use a kit,
you run the risk of poor performance or
product failure. This is not covered under
the terms of the GE warranty.
J-model air conditioners may fit in existing wall
cases. However, they often need a kit to properly
adapt the case to the GE air conditioner. Answer
these questions and see the chart below for the
proper kit.
1 What brand air conditioner will you be replacing?
2 What are the dimensions of the wall case
currently in use?
Use GE
Kit Number:
GE RAB13, 14 & 15
RAK56A100
(ACLB & RCL Chassis)
Hotpoint ACXB10 & 11
RAK107
Whirlpool Type 23W
RAK108
RAK110
Fedders Wall Case "A"
RAK123
Westinghouse Wall Case
RAK126
(Type 2626D73H01)
Use these kits for all
RAB46, 47 & 48
other brands not listed.
RAB36, 37, 38, 46, 47 or 48
RAK690
RAB36, 37, 38, 46, 47 or 48
RAG14E
For:
(ACTB Chassis)
Wall Case
GE RAB30
("F" models)
(J-Chassis)
(J-Chassis)
3 What is the model number of the chassis currently
in use? What is the model (or Type) number of the
wall case currently in use?
Frequently, the J-model adapter kit will apply to
another brand model "series" or specific vin-
tage. In these cases, you need the chassis model
number and/or the wall case or "type" number
to confirm the use of the correct adapter kit.
4 What type of outdoor grille is used with the cur-
rent wall case?
There may be an architectural grille attached
to a wall case to enhance the exterior appear-
ance of the building. Custom grilles may be
used with J-model wall cases provided a J-model
adapter kit is also used to ensure proper
airflow.
Description:
26²W ´ 18²H ´ 24²D
Fits all GE wall cases
Adapts an older Hotpoint wall case to a "J" model chassis.
Fits Hotpoint wall cases 25
Adapts Whirlpool wall case to a "J" model chassis.
Fits Whirlpool wall cases 25
Adapts GE wall case to a "J" model chassis.
Fits the RAB 30 wall case 26²W ´ 18²H ´ 24²D
Adapts Fedders wall case to a "J" model chassis.
Fits Fedders wall cases 27²W ´ 16
Adapts Westinghouse wall case to a "J" model chassis.
Fits Westinghouse wall cases 25
Standard wall case for "J" model chassis.
RAG13 stamped aluminum exterior grille included.
Remove the existing case and replace.
If you attach a custom architectural outdoor grille,
use this kit to ensure proper airflow.
Architectural louvered exterior grille
¤ ²W ´ 16 ¤ ²H ´ 18 ¤ ²D
3 7 5
4 8 8
¤ ²W ´ 16 ¤ ²H ´ 23 ¤ ²D
7 1 1
8 2 8
¤ ²H ´ 16 ¤ ²D
3 3
4 4
¤ ²W ´ 15 ¤ ²H ´ 16²D
7 7
8 16
9