Beko SUBM32U Instructions For Installation And Operation Manual page 8

Control and maintenance
Pos : 27 /Beko T ec hnis che D okumentati on/Sic her hei t/Hinweis Vorschriften Wer kzeug R einigung Kondensat Entsorgung @ 0\mod_1233239666823_15098.doc x @ 15301 @ @ 1
Note
It is imperative to observe all hazard statements and warnings listed here.
Please also observe all regulations and notes regarding industrial safety and fire prevention at the place of
installation.
As a matter of principle, only use suitable and appropriate tools and materials in a proper condition.
Do not use aggressive cleaners and improper devices such as high-pressure cleaners.
Please note that condensates may contain aggressive or harmful components. Therefore, skin contact
should be avoided.
Condensate is subject to mandatory waste disposal. As such, it must be collected in suitable containers, and
disposed of or processed properly.
Pos : 28 /Beko T ec hnis che D okumentati on/Wartung/BEKOM AT/Wartung BM 31U /Wartung BM 31U/32U Ser vice-U nit @ 5\mod_1358510276825_15098.doc x @ 30439 @ @ 1
8
1. Prior to the replacement of the service unit, a reset
needs to be carried out.
The control unit is released by actuating the
arresting hook.
When removed, the TEST button below the LED
must be pressed and held for at least five seconds.
2. Unfasten the BEKOMAT
3. Detach the service unit (5) from the tubing at the
inlet.
Missing numbers are constituents of the BEKOMAT
stand-alone model.
Service-Unit BEKOMAT® 32U / 32U F
® 32U from the outlet (3).