How To Use - FOHERE JSQ-E50S2 User Manual

HOW TO USE

ADD WATER
1) Remove the mist tube assembly.
2) Li the water tank and then remove the foam holding the lever float in position
before using it for the first time.
3) Open the top cover, using a container to fill the water into the tank directly.
4) Put the water tank back into the base.
5) Please don't add the water into the air tube. If there is too much water filled into
the air tube, the machine can't work normally.
6) The water level can't over the MAX water level.
ADD FRAGRANCE OIL
1) Take out aroma box .
2) Use water-soluble aroma oil to drop into
the sponge.
3) Put the aroma box back into the
machine, the aroma function will be on
automatically when turn on the
machine.To stop the aroma function or
when the machine is not in use for a
long time, take out the sponge in the
aroma box, clean and dry it, then put it
back in the aroma box.
Remove the Foam
10
Purified Water