Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Martin System CHAMELEON IV
Summary of Contents for Martin System CHAMELEON IV
- Page 1 CHAMELEON ® CTT4 USER GUIDE...
-
Page 2: Table Of Contents
TABLE OF CONTENTS : DESCRIPTION ................4 NHT PATENTED ...............5 DOGGIFY APP .................6 CTT 4 REMOTE ...............7 CHAMELEON IV ..............11 ® FINGER KICK .................15 SWITCH THE TRANSMITTER ...........16 SWITCH THE COLLAR ............16 WAKE UP ................17 PAIRING THE CHAMELEON TO THE CTT .........18 ®... -
Page 3: Description
The kit uses the highest technologies in the electronic collar A stable stimulation even at high level when the battery is low. industry and most of them are patented by Martin System ® The New High Tension Transformer - NHT (patented). -
Page 4: Doggify App
Stimulation button 1B (ON/OFF/pair a collar) also the configuration of each button (mode and level). The Stimulation button 2A Program button CTT 4 is still compatible with all Martin System devices like: Stimulation button 2B Lanyard attachment Finger Kick Short external antenna... - Page 5 Battery Level of : a) Collar 1 if is visible. 19 23 b) Collar 2 if is visible. c) CTT4 if is visible. Collar status, collar 1: upper paw - collar 2: lower paw: collar not available (CTT 4 is in 1 collar setting). collar available, but no collar already connected (when Bluetooth is in 2 channel setting).
-
Page 6: Chameleon ® Iv
Bidirectionnal Radio Quality Of Signal: a) OK b) Middle c) Weak: (red) d) Unavailable: (red) Temperature value: a) If in Green: in valid defined range. b) If in Red: Out of defined range (lower or higher). c) If --- C or --- F: Unavailable. CHAMELEON ®... - Page 7 CHAMELEON IV ® Middle island Stimulation islands ON/OFF/Pairing Wireless charging area Contact points LEDs Strap (basic perfect fit) CTT4 USER GUIDE...
-
Page 8: Finger Kick
FINGER KICK FINGER KICK LED indication Button Strap CTT4 USER GUIDE... -
Page 9: Switch The Transmitter
SWITCH THE TRANSMITTER If the collar is in Sleep mode (see below), slide the magnet to start the switch ON process. ON/OFF WARNING If the tone doesn’t start with or after the first flashing of LEDs, the battery is empty or very low and you must recharge it. To turn the CTT 4 ON, briefly press and release any key . -
Page 10: Pairing The Chameleon ® To The Ctt
To wake-up the collar, switch ON the CTT4: A possible configuration is a Chameleon® IV paired to: 1 CTT4 The collar will WAKE UP in few seconds. 2 K9 The collar will start immediately a Skin contact measure. 1 PT3000 The LEDs tell you the status of the skin contact Of course, the bidirectional capacity will only work with the measurement (see p.21) -
Page 11: Bidirectionality
Radio Quality of Signal due to constantly changing environmental factors. With the help of this technology, the Martin System® product *When there is no bidirectional radio there will be the possibi- and especially the Chameleon® IV can make Skin contact... -
Page 12: Tip
2/ With the CTT 4 The picto (23) and (25) give indication of the last skin contact measurement received in bidirectionality. The reception of the data is done periodically, every 8 seconds by default. Can be adjust by Doggify. In this scenario, the contact measurement is restarted for 10 seconds on the collar every time the data is asked by the CTT 4. -
Page 13: Stimulation Level
TO LOCK/UNLOCK ALL STIMULATION LEVEL 2/ Sensitive dog Keep pressing the program button Exceptionnaly, a very sensitive dog can feel the skin contact Turn the rotary knob for at least 5 “clicks”. measurement. The Lock picto is displayed, the levels are locked. (display of For that reason, enable “Sensitive dog”... -
Page 14: Unpair A Chameleon ® And The Ctt
1/ Clean the Chameleon® IV The operating mode shown on the display of the CTT 4 is corresponding to the active stimulation button Position and hold the magnet (standalone or in the trans- (white picto mitter) next to the ON/OFF/Pairing point of the receiver. -
Page 15: To Pair/Use A Finger Kick
HOW TO PAIR/USE A FINGER KICK HOW TO PAIR THE CTT 4 TO DOGGIFY 1. Push and hold the program button and one of the corresponding stimulation button of your collar Follow the instruction in Doggify together until a flashing Finger Kick icon appears on During the pairing process, you will need to enter a pairing the screen. - Page 16 CHECKING THE STIMULATION CHARGING THE CTT 4 To check the correct operation of the collar receiver, you need the indicator lamp. (test light) Attach the alligator clips to the contact points. (a red and Wireless Charging a black, consecutive or mirror images are positive and 1.
- Page 17 CHARGING THE CHAMELEON ® Wireless Charging 1. Connect the power supply to a power source. 2. Place the central island of the collar face down on the 3. Attach the red alligator clip on a red contact point in a red charger (centrally/in the middle).
-
Page 18: Chameleon ® Sizes
CHAMELEON IV SIZES ® The medium collar (26 cm - 10 in) Dimensions: 262 x 28 x 18 mm (10 x 11 x 7 in) + elastic perfect fit Weight: 126 g 3 islands on each side for contact points. 6. -
Page 19: Contact Points
CONTACT POINTS The large collar (33 cm - 13 in) Dimensions: 329 x 28 x 18 mm (13 x 11 x 7 in) + elastic perfect fit Weight: 147 g All sets are delivered with 4 × 15- 4 islands on each side for contact points. mm (0.59 in) contact points, 2 red and 2 black (19-mm (0.75 in) contact points are available separately). - Page 20 To enable the stimulation, you need at least one contact on - Administer the appropriate care. a red island and one on a black island to close the electric - Wait until the dog has healed completely before using a circuit.
-
Page 21: Technical Specifications
Dimensions repaired, do not throw it away in the usual household rubbish. 126 x 64 x 28 27 x 30 x 17 (mm) Return it to the vendor or contact Martin System® customer service for further information. Weight 152,2 Power... -
Page 22: Warranty
The liability for damage caused by the improper use of the Name : Michael Bellon / Position : Director product or a breakdown. In the case of a defect, the device will, at MARTIN SYSTEM ® discretion, be repaired or exchanged. - Page 23 Rue Joseph Martin, 35 - B-4450 Lantin - Belgium +32(0)4 263 96 05 - info@martinsystem.com www.martinsystem.com...
Need help?
Do you have a question about the CHAMELEON IV and is the answer not in the manual?
Questions and answers