Martin System Micro B User Manual

Martin System Micro B User Manual

Collar receiver

Advertisement

MICRO B
COLLAR RECEIVER
USER GUIDE
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Micro B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Martin System Micro B

  • Page 1 MICRO B COLLAR RECEIVER USER GUIDE...
  • Page 2: Table Of Contents

    Pairing the Collar Receiver with a Transmitter Unpairing the Collar Receiver Pairing the Collar Receiver via Bluetooth Charging the Collar Receiver Precautions for Use Troubleshooting Checking the Stimulation Operation Recycling Warranty Conformity 2   |   Micro B Collar Receiver - User Manual - EN - 1.0...
  • Page 3: Description

    34 g □ □ Power supply: 3.7 V - 200 mAh Lithium Polymer □ □ Frequency: 869.5 MHz □ □ Antenna: Integral □ □ Operating temperature: -20°C to +40°C Micro B Collar Receiver - User Manual - EN - 1.0   |   3...
  • Page 4 Operating modes Depending on your transmitter model and configuration, the Micro B collar receiver is able to stimulate the dog in different ways and with different levels. • For more detailed information, please check the user guide of your transmitter.
  • Page 5 Main benefits Your Micro B collar receiver uses the best technologies in the electronic collar industry and most of them are patented by Martin System®: • The New High Tension Transformer - NHT (patented). • The consistent reliable stimulation - S.S.C. ("Stimulation à Sensation Constante") (patented).
  • Page 6 Safe and fair stimulation The Micro B collar receiver is equipped with the patented S.S.C. stimulation: □ □ It measures the conditions of the dog's skin 20 times per second . □ □ It adapts the output stimulation level to ensure a constant and reliable sensation felt by the dog.
  • Page 7: Transmitter Magnet Location And Range

    □ □ The range of the collar receiver. • The given range is valid in optimal conditions. • For more detailed information, please check the user guide of your transmitter. Micro B Collar Receiver - User Manual - EN - 1.0   |   7...
  • Page 8: Switching The Collar Receiver On And Off

    Slide the magnet (standalone or in the transmitter) next to the ON / OFF / synchronizing point of the receiver. ► ► You hear a descending tone. ► ► The LEDs stop flashing. ► ► The collar is OFF. 8   |   Micro B Collar Receiver - User Manual - EN - 1.0...
  • Page 9: Fitting The Collar On The Dog

    If the strap is too tight, the dog will have difficulty breathing. Use the CMS (Contact Measurement System) to fit the collar as loosely as possible while ensuring a good contact with the skin.   Micro B Collar Receiver - User Manual - EN - 1.0   |   9...
  • Page 10: Checking The Collar Contact

    □ □ When there is correct contact, one LED blinks twice every 3 seconds. □ □ Press on any button on the transmitter or on the FingerKick to stop the CMS. 10   |   Micro B Collar Receiver - User Manual - EN - 1.0...
  • Page 11: Pairing The Collar Receiver With A Transmitter

    Within 10 seconds, press the simulation button on your remote or on the connected fingerkick. Press the button again to make sure the pairing is done. Press the stimulation button and check that the collar reacts.   Micro B Collar Receiver - User Manual - EN - 1.0   |   11...
  • Page 12: Unpairing The Collar Receiver

    The LEDs stop flashing quickly and simultaneously. ► ► The corresponding pairing is erased. You can pair the Micro B collar receiver with up to 4 transmitters / ID codes (that is both sides of 2 PT3000 devices): □ □ The transmitters are paired in the order 1, 2, 3, and 4.
  • Page 13: Pairing The Collar Receiver Via Bluetooth

    ON / OFF / synchronizing point of the receiver. ► ► A green check sign is displayed on the application screen. ► ► The collar receiver is paired with your smartphone. Micro B Collar Receiver - User Manual - EN - 1.0   |   13...
  • Page 14: Charging The Collar Receiver

    Plug the collar receiver on the charger module aligning the red dot on the collar receiver with the red dot on the charger module.. ► ► If the receiver is correctly placed, the battery automatically charges. 14   |   Micro B Collar Receiver - User Manual - EN - 1.0...
  • Page 15 Check the LED on the collar receiver: • Flashing: the battery is charging. • Continuous: the battery is charged. Micro B Collar Receiver - User Manual - EN - 1.0   |   15...
  • Page 16: Precautions For Use

    Regularly check that the contact points are securely attached and □ □ locked in place. Never leave the collar receiver close to a transmitter or a magnet □ □ that may pair or unpair the collar unexpectedly. 16   |   Micro B Collar Receiver - User Manual - EN - 1.0...
  • Page 17: Troubleshooting

    If it is a range problem, replace your transmitter battery. If you encounter any other problem □ □ Check the FAQ on our website. □ □ Contact our service centre. Micro B Collar Receiver - User Manual - EN - 1.0   |   17...
  • Page 18: Checking The Stimulation Operation

    If the receiver is working correctly, the indicator lamp illuminates with each impulse (the higher the level, the brighter the illumination). ► ► If the indicator lamp does not light for levels higher than 1, contact your retailer.   18   |   Micro B Collar Receiver - User Manual - EN - 1.0...
  • Page 19: Recycling

    If you are no longer using this material or if it cannot be repaired, do not throw it away in the usual household rubbish. Return it to the vendor or contact Martin System® customer service for further information. Micro B Collar Receiver - User Manual - EN - 1.0   |   19...
  • Page 20: Warranty

    • The liability for damage caused by the improper use of the product or a breakdown. In the case of a defect, the device will, at Martin System® discretion, be repaired or exchanged.   To benefit from this warranty, you must send to Martin System®, within ten days, the warranty certificate that accompanies the device .
  • Page 21: Conformity

    Place and date of this document: Lantin, 15 March 2019 MARTIN SYSTEM™ Rue Joseph Martin, 35 4450 LANTIN - BELGIUM Signed by or for the manufacturer: Name: Michael Bellon Position : Director Micro B Collar Receiver - User Manual - EN - 1.0   |   21...
  • Page 22 Notes 22   |   Micro B Collar Receiver - User Manual - EN - 1.0...
  • Page 24 Rue Joseph Martin, 35 - B-4450 Lantin - Belgium +32(0)4 263 96 05 - info@martinsystem.com www.martinsystem.com...

This manual is also suitable for:

Pro trainer pt 3000 ssc

Table of Contents