Initial Preparation - OptoTest OP831 Instruction Manual

Initial Preparation

Unpacking and Inspection
The unit was carefully inspected, mechanically, electrically and optically before shipment.
When received, the shipping carton should contain the items listed in Standard Contents.
Account for and inspect each item. In the event of a damaged instrument, write or call
OptoTest Corp, California.
Note: Be aware that accessories such as detector adapters, remote head detectors, and
high performance reference cables will be located inside a small box labeled "Accessories
Inside". If this box is not included with the original shipment, contact OptoTest of their
nearest distributor.
Please retain the shipping container in case re-shipment is required for any reason.
Damaged In Shipment
All instruments are shipped F.O.B. Camarillo when ordered from OptoTest.
If you receive a damaged instrument you should:
1. Report the damage to your shipper immediately.
2. Inform OptoTest Corporation.
3. Save all shipping cartons.
Failure to follow this procedure may affect your claim for compensation.
Standard Contents
1. Model OP831 Bidirectional Insertion Loss Meter
2. Power Cord (U.S. Shipments only)
3. USB A-B cable
4. Certificate of Calibration and if requested the Metrology Report
5. Instruction Manual(s)
6. CD/USB drive with applicable software and documentation (if ordered)
4 of 15
OP831