Initial Preparation - OptoTest OP735 Instruction Manual

Initial Preparation

Unpacking and Inspection
The unit was carefully inspected, mechanically, electrically and optically before
shipment. When received, the shipping carton should contain the items listed in
Standard Contents. Account for and inspect each item. In the event of a damaged
instrument, write or call OptoTest Corp, California.
Note: Be aware that accessories such as detector adapters, remote head detectors,
and high performance reference cables will be located inside a small box labeled
"Accessories Inside". If this box is not included with the original shipment, contact
OptoTest of their nearest distributor.
Please retain the shipping container in case re-shipment is required for any reason.
Damaged In Shipment
All instruments are shipped F.O.B. Camarillo when ordered from OptoTest.
If you receive a damaged instrument you should:
1. Report the damage to your shipper immediately.
2. Inform OptoTest Corporation.
3. Save all shipping cartons.
Failure to follow this procedure may affect your claim for compensation.
Standard Contents
1. Model OP735 Multichannel Optical Power Meter
2. Power Cord (U.S. Shipments only)
3. USB A-B cable
4. Certificate of Calibration and if requested the Metrology Report
5. Instruction Manual(s)
6. CD with applicable software and documentation (if ordered)
7. Rack mount kit (optional)
4 of 12
OP735