OptoTest OP740 Quick Start

Overview
The OP740 High Speed Multichannel OPM offers a
state-of-the art solution for high speed optical power
measurement applications where multiple channels
are needed. Unlike many other systems, this
instrument is comprised of individual power meters
allowing for simultaneous data acquisition over all
channels with unparalleled speed.
The OP740 is available with 4 to 24 channels and can
be configured for a variety of detector and connector
interfaces. With the rack mount option, multiple units
can be combined for even higher channel counts.
This quick start guide will demonstrate the steps
necessary to begin monitoring optical power using
the OP740.
The OP740 includes:
•
Model OP740 Multichannel Optical Power Meter
•
9V Power Supply and Power Cord
•
USB A-B cable and USB-C
•
Certificate of Calibration and, if requested, the
Metrology Report
•
Instruction Manual(s) and Quick Start Guide
•
USB drive with applicable software and
documentation (if ordered)
•
Rackmount Kit (optional)
Contacting OptoTest
1.805.987.1700 (7:30 a.m. to 5 p.m. PST)
www.optotest.com
engineering@optotest.com
OptoTest Corp.
4750 Calle Quetzal
Camarillo, CA 93012 USA
Notice of Proprietary Rights
The design concepts and engineering details embodied in this
manual, which are the property of OptoTest Corporation, are
to be maintained in strict confidence. No element or detail of
this manual is to be spuriously used or disclosed without the
express written permission of OptoTest Corporation. All rights
are reserved. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in any form or by
any means, electronic, mechanical, photocopying, recording,
or otherwise, without prior written permission from OptoTest
Corporation.
COPYRIGHT© 2018 by OptoTest Corporation
ALL RIGHTS RESERVED
PRINTED IN THE UNITED STATES OF AMERICA
MNOP740QS-RevA
Warranty Information
See our Terms and Conditions at www.optotest.com for
warranty information.
NOTE: Do not send instruments for any reason without
contacting OptoTest headquarters first.
To request an RMA contact OptoTest at +1.805.987.1700
or customerservice@optotest.com.
OP740
High Speed Multichannel OPM

Quick Start

www.optotest.com
1.805.987.1700