Table of Contents
Advertisement
Measure the PCBA, Motor and Internal Wire Assembly
7. Contact the red pen pin to the contact with black wire of the yellow connector (connect to the
internal wire assembly) and the black pen pin to the three contactors of the black connector (connect
to the motor).
Notice: If the LCD displays 0.45~0.55V for each measurement, means a good PCBA; otherwise means a
broken PCBA, replace a new PCBA.
PCBA Measurement
LBX6000 Blower
10
Advertisement
Table of Contents
Need help?
Do you have a question about the LBX6000 and is the answer not in the manual?
Questions and answers