RGBlink mini-edge User Manual page 45

2.
The user can gain access to Background Interface through the following methods:
Use ENTER knob to move the cursor to OVERLAY icon in Sour Selection Area, press ENTER knob
once again to enter. Or long press OVERLAY Button
3.
Overlay Interface is shown as below: window with a green border indicates the cursor position,
while window with a red border indicate that the backgound image has been places on PVW
window.
To add Overlay Source, Please follow the steps outlined as follows.
1) "+"indicates window with no source saved. If the user wants to add overlay image to Window
7, rotate ENTER knob to move the cursor to Window 7, press ENTER knob once again.
© Xiamen RGBlink Science & Technology Co., Ltd.
| support@rgblink.com | www.rgblink.com
Ph: +86 592 5771197
along the PREVIEW Outputs Row.
44