Do you have a question about the E20 Series and is the answer not in the manual?
Questions and answers
Walter
January 16, 2025
Is the transport mode necessary when transporting it in a car?
1 comments:
Mr. Anderson
May 14, 2025
Yes, transport mode is necessary for the InMotion E20 Series when transporting it in a car. Without activation, the vehicle remains in transport mode, unable to balance, which is intended for safe transportation.
Page 1
Electric Unicycle User Manual Electric Unicycle User Manual Before using your unicycle, please read the instructions, and keep this manual for ready reference. Original instructions...
The SN is a 16-character numeric code that can be found on the packaging box label, the body of the product, or in the device information section of the INMOTION App. Get closer to your seller so he can refer you to an appropriate training organization.
PACKING LIST Please carefully check all components inside the packaging. If any components are missing, please consult your point of purchase. User Manual User Manual Power Cord /Adapter Warning: Please keep the packaging box and packaging materials for at least 30 days for future use when transporting the electric unicycle.
DIAGRAM Trolley handle Paddings Power Button Speaker Battery Indicator Charging port Headlight Tail light Ambient light Ambient light Pedal Tire PRODUCT FEATURES Power On/Off: LPress and hold the power button for 1 second when the device is off/on to turn it on/off. HEADLIGHT: When the device is on, press the power button briefly to turn the headlight on/off.
Page 6
Charging The original charger is 54.6V. For the battery indicator: 0-25%, four bars flash in a cycle; 25-50%, one bar is solid, three bars flash in a cycle; 50-75%, two bars are solid, two bars flash in a cycle; 75-100%, three bars are solid, one bar flashes in a cycle; 100%, four bars are solid.
INITIAL USE Activation 1. Users need to connect to the INMOTION App to activate the vehicle. Without activation, the vehicle remains in transport mode, unable to balance, with the tail light flashing as a reminder. 2. After activation through the App, the vehicle automatically exits transport mode and enters Beginner Mode.
Page 9
Electric Unicycle supports Bluetooth 5.0 BLE. The BLE ID is V12Pro-XXXXXXXX, where XXXXXXXX is the last 8 digits of SN. Install the INMOTION App on your mobile device (iOS 12.1 and above or Android 7.0 and above supported) and follow the prompts to connect your Electric Unicycle.
LEARNING TO RIDE 1. Step on the pedal with one foot, then 2. Step on the pedal with one foot, keep 3. Step on the pedal with one foot, lift swing back and forth. your feet and body upright and the other foot off the ground for 1-2 gradually shift your weight up.
Page 11
INMOTION App Facebook group Website www.inmotionworld.com...
Need help?
Do you have a question about the E20 Series and is the answer not in the manual?
Questions and answers
Is the transport mode necessary when transporting it in a car?
Yes, transport mode is necessary for the InMotion E20 Series when transporting it in a car. Without activation, the vehicle remains in transport mode, unable to balance, which is intended for safe transportation.
This answer is automatically generated