Ubisys 2 Series Manual

Switching Actuator S1-R (Series 2)
Zigbee and Bluetooth – with Power and Energy
Metering
Item No.: 1151
Specifications
The Switching Actuator S1-R is a radio controlled universal switch actuator
with integrated power and energy metering. It is compatible to standard fuse
boxes and fully integrates into the rest of the building technology. Due to the
use of radio technology, it is not only suitable for new buildings, but also for
existing buildings. The Switching Actuator S1-R offers full functionality when
combined with other components of the ubisys Smart Home product line or
other Zigbee systems and allows for example:
•
Zero-Spark output: The S1-R features the latest ubisys Zero-Spark
technology, which completely eliminates ignition sparks when switching
the electrical load on and off. This protects the electrical consumer
and the switching contacts of the S1-R and avoids bulky external RC
snubbers
•
Control via smartphone and tablet using the ubisys app, or as usual via
buttons or switches
•
Zigbee router integrated
•
Integration in scenes and group control
•
Integration in scheduled actions and automations
•
Interoperable with many Smart Home systems of other manufacturers
•
Power and energy metering
•
Zigbee Direct (Bluetooth): Simplified commissioning and control via
smartphone and tablet – without gateway or hub
•
Zigbee Green Power: Can be connected directly to maintenance-free
Green Power switches
Dimensions
(1 TE)
17,8 mm
Installation
The Switching Actuator S1-R meets the requirements of DIN 43880 and is
designed for installation in fuseboxes, mounted on DIN rails according to
EN50022.
59 mm
B16
Leads:
*) The S1-R has two terminals for the operating voltage (L), which are inter-
nally connected. It is not necessary to connect both.
The Switching Actuator S1-R retains its switch position when disconnected
from power. The switch position is undefined upon delivery; i. e. the switching
output can be conductively connected to the phase L!
Deinstallation
The S1-R has a spring mechanism (C). To avoid damaging it when removing,
please proceed as follows:
First push the S1-R upwards (A) and then remove it from the DIN rail (B) with
a tilting movement (D).
Zigbee Initial Commissioning via gateway or hub
1. Connect the unit to a power source (according to the leads).
2. Open a Zigbee network: when using the ubisys gateway, tap Confi-
guration -> Basic Configuration -> Open for new devices in the
ubisys app (if you are using third-party gateways or apps, follow the
corresponding procedure).
3. The Zigbee network is open and the device joins.
4. The device appears in the component list: Configuration -> Basic
Configuration -> Components.
Page 1/2 As per 02/2024