EPH Controls RFC V2 Installation And Operation Manual page 19

To disconnect a RFC
UFH10-RF
On the RFC :
V2
1.
Detach the front housing of the thermostat from the baseplate by
pressing the
housing away from the baseplate.
2.
Press the RF button
'nOE' will appear on the screen followed by '- - -'.
3.
Press and hold the RF button
appears on the screen.
4. Press the
The thermostat is now disconnected from the.
Note:
The thermostats can also be disconnected at the
or UFH10-RF. Please see
details.
V2
on the bottom of the thermostat and pull the front
once on the PCB.
twice to con rm.
R_7-RF
EPH Controls Ltd.
from both R_7-RF
again for 10 seconds until 'Adr'
or UFH10-RF operation guide for
V2
or
V2
R_7-RF
V2
17