Kodak ESP 5200 Start Here Manual page 6

5
Loading Paper and Calibrating
Paper Tray
Left Paper-edge Guide
Paper Stop
Paper Tray Extender
6
a. Open the paper tray.
b. Pull out the paper tray extender until it is fully extended.
c. Lift the paper stop.
d. Make sure the left paper-edge guide is to the far left.
e. Carefully fan and stack the paper, then insert it into the tray.
f. Move the paper forward until it stops.
g. Move the left paper-edge guide until it stops.
h. Press Start. Calibration will take two to three minutes.
OK
www.kodak.com/go/aiosupport