Kodak ESP 5200 Start Here Manual page 11

7
Installing Software on WINDOWS OS
KODAK Home Center Software for WINDOWS OS
a. Load the KODAK All-in-One Printer Software CD into the CD
drive. Follow the on-screen instructions.
If the installer window does not open, click Start, then click
Computer or My Computer, and double-click the CD drive.
NOTE: If your computer does not have a CD drive, go to
www.kodak.com/go/downloads
b. If instructed, connect the USB cable to the USB port on the
printer and to your computer. Continue to follow the on-screen
instructions until installation is complete.
NOTE: If you are prompted by your firewall during software
installation, be sure to allow access. For additional information,
go to www.kodak.com/go/inkjetnetworking.
If you have additional computers on your network, install the
KODAK All-in-One Printer Software on each computer.
KODAK Home Center is installed with your KODAK All-in-One Printer
Software. The Home Center icon will appear on your desktop. You can
use it to browse and edit pictures, print, copy, scan, order supplies,
access the User Guide, and configure your All-in-One Printer from your
computer.
www.kodak.com/go/aiosupport
to download the software.
11