Kodak ESP 5200 Start Here Manual page 16

Thank you for purchasing a KODAK All-in-One Printer.
In the unlikely event that your printer does not operate as expected,
Do the following steps to begin troubleshooting.
For additional assistance:
Eastman Kodak Company
Rochester, NY 14650 U.S.A.
© Eastman Kodak Company, 2009
MC/MR/TM: Kodak.
1K5813
please do not return it to the store.
1. Power cycle the printer by unplugging the printer. Wait 5 seconds, and then
plug the power cord back into the printer.
2. Confirm that you are using a USB 2.0 cable. You can purchase a USB 2.0 cable
online at www.kodak.com/go/usbcable
3. Make sure that you have the most up-to-date software and firmware files from
the Web. Go to www.kodak.com/go/downloads
Go to www.kodak.com/go/aiosupport, select your printer, and view Frequently
Asked Questions (FAQs), Step-by-Step Solutions and Repairs, User Guides, and
more.
or at your local retailer.
Printed in
Windows® is a registered trademark of Microsoft Corporation.
Macintosh® is a registered trademark of Apple Inc.
to download the latest files.