Ports - Returnstar Interactive Tech IQTouch TB1300 Pro User Manual

1.2.

Ports

Front USB ports and rear USB 3.0/USB 2.0 ports switch connections based on signal sources. If the current

signal source is reading the data from an external product connecting to the port, please switch the signal
source after the data reading is complete. Otherwise, the data or product may be damaged.
For USB use, USB 2.0 provides up to 500Ma whereas USB 3.0 provides up to 900Ma of power. Please make

sure the USB flash drive is formatted to FAT32 before inserting it into the panel.
Please use the supplied cable in the accessory box or the HDMI association certified shielded cable to better

ensure the signal quality.
While HDMI and Display Port offer support for cables of varying lengths, the maximum cable length that the

panel recommends for optimal performance is 3 meters (10 feet) for HDMI and 1.8 meters (around 6 feet) for
Display Port. Using cable longer than recommended length may cause data loss and a negative impact on
display quality.
Front Ports
11