ASROCK P4S61 User Manual page 6

BIOS:
OS:
1. While CPU overheat is detected, the system will automatically shutdown.
Please check if the CPU fan on the motherboard functions properly
before you resume the system. To improve heat dissipation, remember to
spray thermal grease between the CPU and the heatsink when you install
the PC system.
2. Do NOT use a 3.3V AGP card on the AGP slot of P4S61 motherboard!
It may cause permanent damage!
3. Power Management for USB 2.0 works fine under Microsoft
XP SP1/2000 SP4. It may not work properly under Microsoft
98/ME. Please refer to Microsoft
http://www.microsoft.com/whdc/hwdev/bus/USB/USB2support.mspx
4. Although P4S61 offers stepless control, it is not recommended to perform
over clocking. When the CPU frequency of P4S61 is set to perform over
clocking, other clocks, such as PCI clock, AGP clock and Memory clock
will also be overclocked proportionally. Frequencies other than the
recommended CPU bus frequencies may cause the instability of the
system or damage the CPU and the motherboard.
AMI legal BIOS; Supports "Plug and Play";
ACPI 1.1 compliance wake up events;
Supports jumperfree; SMBIOS 2.3.1 support;
CPU frequency stepless control
(only for advanced users' reference, see CAUTION 4)
®
Microsoft Windows
®
®
98SE / ME / 2000 / XP compliant
official document at
® Windows ®
® ®
Windows