ASROCK P4I45GV R5.0 User Manual page 27

Resource Configuration:
Advanced
Resource Configuration
PCI Latency Timer (PCI Clocks)
Primary Graphics Adapter
F1:Help
Esc:Previous Menu
PCI Latency Timer (PCI Clocks): The default is 32. We recommend you to
keep the default value unless your PCI expansion cards' specifications
require other settings.
Primary Graphics Adapter: This allows you to select [PCI], [Internal VGA], or
[AGI] as the primary graphics adapter.
Peripheral Configuration:
Advanced
Peripheral Configuration
OnBoard FDC
OnBoard Serial Port
OnBoard Infrared Port
OnBoard Parallel Port
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA Channel
OnBoard Midi Port
Midi IRQ Select
OnBoard Game Port
OnBoard IDE
OnBoard LAN
OnBoard AC' 97 Audio
OnBoard MC' 97 Modem
F1:Help
Esc:Previous Menu
OnBoard FDC: Use this to enable or disable floppy drive controller.
OnBoard Serial Port: Use this to set addresses for the onboard serial ports or
disable serial ports. Configuration options: [Auto], [Disabled], [3F8 / IRQ4 /
COM1], [2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4].
OnBoard Infrared Port: You may select [Auto] or [Disabled] for this onboard
infrared port feature.
AMIBIOS SETUP UTILITY - VERSION 3.31a
32
PCI
:Select Item
+/-:Change Values
Enter:Select
AMIBIOS SETUP UTILITY - VERSION 3.31a
Auto
Auto
Disabled
Auto
ECP + EPP
1.9
Auto
Auto
Disabled
5
200H
Both
Enabled
Auto
Auto
:Select Item
+/-:Change Values
Enter:Select
[ Setup Help ]
<Enter> to select PCI
clocks. Leave on
default setting for the
best PCI performance.
F9:Setup Defaults
F10:Save & Exit
Sub-Menu
[ Setup Help ]
<Enter> to enable or
disable the floppy
drive controller.
F9:Setup Defaults
F10:Save & Exit
Sub-Menu
2 7