ASROCK P43ME - V1.1 User Manual page 22

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Headers
(9-pin USB8_9)
(see p.10 No. 19)
(9-pin USB6_7)
(see p.10 No. 17)
Print Port Header
AFD#
ERROR#
(25-pin LPT1) PINIT#
(see p.10 No. 22)
1
SPD1
SPD0
STB#
Infrared Module Header
(5-pin IR1)
(see p.10 No. 30)
Internal Audio Connectors
(4-pin CD1)
(see p.10 No. 25)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.10 No. 26)
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to power cable to the power
the power
connector of the power supply.
supply
Besides six default USB 2.0
USB_PWR
P-9
ports on the I/O panel, there are
P+9
GND
DUMMY
two USB 2.0 headers on this
1
motherboard. Each USB 2.0
GND
header can support two USB
P+8
P-8
USB_PWR
2.0 ports.
USB_PWR
P-7
P+7
GND
DUMMY
1
GND
P+6
P-6
USB_PWR
This is an interface for print
port cable that allows
GND
SLIN#
convenient connection of printer
devices.
SPD7
SPD6
ACK#
SPD5 BUSY
SPD4 PE
SPD3
SLCT
SPD2
This header supports an
IRTX
+5V
DUMMY optional wireless transmitting
and receiving infrared module.
1
GND
IRRX
This connector allows you
to receive stereo audio input
CD1
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
This is an interface for front
GND
PRESENCE#
panel audio cable that allows
MIC_RET
OUT_RET
convenient connection and
control of audio devices.
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
2 2 2 2 2 2
2 2 2 2