ASROCK P43ME - V1.1 User Manual page 24

ATX Power Connector
(24-pin ATXPWR1)
(see p.10 No. 6)
Though this motherboard provides 24-pin ATX power connector,
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your power
supply along with Pin 1 and Pin 13.
ATX 12V Power Connector
(4-pin ATX12V1)
(see p.10 No. 2)
Serial port Header
(9-pin COM1)
(see p.10 No. 23)
HDMI_SPDIF Header
(3-pin HDMI_SPDIF1)
(see p.10 No. 27)
HDMI_SPDIF Cable
(Optional)
A. black end
+5V
SPDIFOUT
blue
black
GND
Please connect an ATX power
12 24
supply to this connector.
1 13
20-Pin ATX Power Supply Installation
Please connect an ATX 12V
power supply to this connector.
This COM1 header supports a
RRXD1
DDTR#1
serial port module.
DDSR#1
CCTS#1
1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
HDMI_SPDIF header, providing
1
SPDIF audio output to HDMI VGA
GND
card, allows the system to
SPDIFOUT
+5V
connect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
Please connect the black end (A)
C of HDMI_SPDIF cable to the
B
HDMI_SPDIF header on the
A
motherboard. Then connect the
white end (B or C) of
HDMI_SPDIF cable to the
HDMI_SPDIF connector of HDMI
VGA card.
B. white end (2-pin) C. white end (3-pin)
SPDIFOUT SPDIFOUT
blue
GND black
2 4 2 4 2 4
2 4 2 4
12 24
1 13
blue
black
GND