ASROCK P43C-ME Installation Manual
  1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. P43C-ME
  6. Installation manual
ASROCK P43C-ME Installation Manual

ASROCK P43C-ME Installation Manual

Hide thumbs Also See for P43C-ME:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2009 ASRock INC. All rights reserved.
ASRock P43C-ME Motherboard
Published November 2009
1 1 1 1 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P43C-ME and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ASROCK P43C-ME

Summary of Contents for ASROCK P43C-ME

  • Page 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.

  • Page 2: Motherboard Layout

    (HD_AUDIO1, Lime) IDE1 Connector (IDE1, Blue) PCI Slots (PCI1 - 2) SATAII Connector (SATAII_2 (Port 1), Red) PCI Express 2.0 x16 Slot (PCIE2, blue) SATAII Connector (SATAII_1 (Port 0), Red) Infrared Module Header (IR1) SPI BIOS Chip PCI Express x1 Slot (PCIE1)
  • Page 3 Coaxial SPDIF Out Port ** 7 Front Speaker (Lime) PS/2 Keyboard Port (Purple) * There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications ACT/LINK...
  • Page 4 To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find “VIA HD Audio Deck” tool on your system. Please follow below instructions according to the OS you install.

  • Page 5: Package Contents

    This Quick Installation Guide contains introduction of the motherboard and step-by-step installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice.

  • Page 6: Specifications

    Specifications Specifications Specifications Specifications Specifications Platform - Micro ATX Form Factor: 9.6-in x 8.3-in, 24.4 cm x 21.1 cm ® - LGA 775 for Intel Core 2 Extreme / Core 2 Quad / Core ® ® ® 2 Duo / Pentium...
  • Page 7 - 1 x ATA133 IDE connector (supports 2 x IDE devices) - 1 x Floppy connector - 1 x IR header - 1 x Print port header - 1 x COM port header - 1 x HDMI_SPDIF header - CPU/Chassis/Power FAN connector...
  • Page 8 Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
  • Page 9 USB flash drive or hard drive must use FAT32/16/12 file system. 13. The software name itself – OC DNA literally tells you what it is capable of. OC DNA, an exclusive utility developed by ASRock, provides a conve- nient way for the user to record the OC settings and share with others.
  • Page 10 16. EuP, stands for Energy Using Product, was a provision regulated by European Union to define the power consumption for the completed system. According to EuP, the total AC power of the completed system shall be under 1.00W in off mode condition. To meet EuP standard, an EuP ready motherboard and an EuP ready power supply are required.

  • Page 11: Pre-Installation Precautions

    Before you insert the 775-LAND CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Page 12 775-LAND CPU For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 2-3. Carefully place the CPU into the socket by using a purely vertical motion.

  • Page 13: Installation Of Cpu Fan And Heatsink

    1. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. 2. This cap must be placed if returning the motherboard for after service. Step 4. Close the socket: Step 4-1. Rotate the load plate onto the IHS.

  • Page 14: Installation Of Memory Modules (Dimm)

    Channel Memory Technology. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR2/DDR3 DIMM pair in the slots of the same color. In other words, you have to install identical DDR2 DIMM pair in Dual Channel (DDRII_1 and DDRII_2; Yellow slots;...

  • Page 15: Installing A Dimm

    Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

  • Page 16: Expansion Slots (Pci And Pci Express Slots)

    2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 2 PCI Express slots on this motherboard. PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE Slots: PCIE1 (PCIE x1 slot) is used for PCI Express cards with x1 lane width cards, such as Gigabit LAN card, SATA2 card, etc.

  • Page 17: Jumpers Setup

    After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS.
  • Page 18 Please use jumper to force NB to be strapped at higherfrequency, so the DRAM can work at lower frequency. If you want to overclock the CPU you adopt to FSB1066 on this motherboard, you need to adjust the jumpers. Please short pin2, pin3 for FSB1 jumper, pin4, pin5 for FSB2 jumper, and pin4, pin5 for FSB3 jumper.

  • Page 19: Onboard Headers And Connectors

    (33-pin FLOPPY1) (see p.2 No. 24) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) (39-pin IDE1, see p.2 No. 9) connect the black end...
  • Page 20 USB 2.0 Headers Besides six default USB 2.0 ports on the I/O panel, there are (9-pin USB8_9) two USB 2.0 headers on this (see p.2 No. 22) motherboard. Each USB 2.0 header can support two USB 2.0 ports. (9-pin USB6_7) (see p.2 No.
  • Page 21 Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.
  • Page 22 (see p.2 No. 8) Though this motherboard provides 24-pin ATX power connector, it can still work if you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 13.

  • Page 23: Driver Installation

    Driver Installation Guide Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers.

  • Page 24: Untied Overclocking Technology

    64-bit OS on your system. When you see “Where do you want to install Windows?” page, please insert the ASRock Support CD into your optical drive, and click the “Load Driver” button on the left on the bottom to load the Intel ®...

  • Page 25: Bios Information

    ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double- click on the file “ASSETUP.EXE” from the BIN folder in the Support CD to display the menus.
  • Page 26 1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock P43C-ME Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.

  • Page 27: Spezifikationen

    Spezifikationen Spezifikationen Spezifikationen Spezifikationen Spezifikationen Plattform - Micro ATX-Formfaktor: 24.4 cm x 21.1 cm; 9.6 Zoll x 8.3 Zoll ® - LGA 775 für Intel Core 2 Extreme / Core 2 Quad / Core ® ® ® 2 Duo / Pentium...
  • Page 28 - 2 x USB 2.0-Anschlüsse (Unterstützung 4 zusätzlicher USB 2.0-Anschlüsse) (siehe VORSICHT 9) BIOS - 8Mb AMI BIOS - AMI legal BIOS mit Unterstützung für “Plug and Play” - ACPI 1.1-Weckfunktionen - SMBIOS 2.3.1 - Zentraleinheit, DRAM, GTL, NB, SB, SB 1.1, VTT Stromspannung Multianpassung - Unterstützt Smart BIOS...
  • Page 29 Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Page 30 Durch Betriebssystem-Einschränkungen kann die tatsächliche Speichergröße weniger als 4 GB betragen, da unter Windows ® 7 / Vista XP etwas Speicher zur Nutzung durch das System reserviert wird. Unter Windows ® OS mit 64-Bit-CPU besteht diese Einschränkung nicht. Der Mikrofoneingang dieses Motherboards unterstützt Stereo- und Mono- Modi.
  • Page 31 USB-Flash-Laufwerk oder die Festplatte das Dateisystem FAT32/16/12 benutzen muss. 13. Allein der Name – OC DNA* – beschreibt es wörtlich, was die Software zu leisten vermag. OC DNA ist ein von ASRock exklusiv entwickeltes Dienstprogramm, das Nutzern eine bequeme Möglichkeit bietet, Übertaktungseinstellungen aufzuzeichnen und sie Anderen mitzuteilen.

  • Page 32: Einstellung Der Jumper

    +5VSB (Standby) zu setzen (siehe S.2 - No. 2) und die PS/2 oder USB- Weckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. CMOS löschen (CLRCMOS1, 3-Pin jumper) (siehe S.2 - Nr. 32)
  • Page 33 Möchten Sie das Speichermodul übertakten, wofür Sie auf diesem Motherboard DDR2 1200 verwenden, müssen Sie die Jumper umsetzen. Verbinden (schließen) Sie Pin 2, Pin 3 des FSB1-Jumpers, Pin 4, Pin 5 des FSB2-Jumpers und Pin 4, Pin 5 des FSB3-Jumpers. Andernfalls funktioniert das Speichermodul nicht richtig auf diesem Motherboard.
  • Page 34 Möchten Sie die CPU übertakten, die Sie auf diesem Motherboard auf FSB1333 aufgerüstet haben, müssen Sie Jumper einstellen. Schließen Sie den Pin2 und den Pin3 des FSB1-Jumpers kurz, Schließen Sie den Pin4 und den Pin5 des FSB2-Jumpers kurz, und Schließen Sie den Pin2 und den Pin3 des FSB3-Jumpers kurz.
  • Page 35 (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2 - No. 24) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (blau) (39-pin IDE1, siehe S.2 - No. 9)
  • Page 36 1. High Definition Audio unterstützt Jack Sensing (automatische Erkennung falsch angeschlossener Geräte), wobei jedoch die Bildschirmverdrahtung am Gehäuse HDA unterstützen muss, um richtig zu funktionieren. Beachten Sie bei der Installation im System die Anweisungen in unserem Handbuch und im Gehäusehandbuch. ASRock P43C-ME Motherboard...
  • Page 37 2. Wenn Sie die AC’97-Audioleiste verwenden, installieren Sie diese wie nachstehend beschrieben an der Front-Audioanschlussleiste: A. Schließen Sie Mic_IN (MIC) an MIC2_L an. B. Schließen Sie Audio_R (RIN) an OUT2_R und Audio_L (LIN) an OUT2_L an. C. Schließen Sie Ground (GND) an Ground (GND) an.
  • Page 38 Obwohl dieses Motherboard einen 24-pol. ATX-Stromanschluss bietet, kann es auch mit einem modifizierten traditionellen 20-pol. ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu verwenden, stecken Sie den Stecker mit Pin 1 und Pin 13 ein. Installation eines 20-pol. ATX-Netzteils ATX 12V Anschluss Bitte schließen Sie an diesen...
  • Page 39 Ende (A) des (Option) HDMI_SPDIF-Kabels mit dem HDMI_SPDIF-Anschluss am Motherboard. Schließen Sie dann das weiße Ende (B oder C) des HDMI_SPDIF-Kabels an den HDMI_SPDIF-Anschluss der HDMI-VGA-Karte an. A. Schwarzes Ende B. Weißes Ende (zweipolig) C. Weißes Ende (dreipolig) ASRock P43C-ME Motherboard...
  • Page 40 Erscheint der Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf das File ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert.

  • Page 41: Contenu Du Paquet

    1.1 Contenu du paquet 1.1 Contenu du paquet Carte mère ASRock P43C-ME (Facteur de forme Micro ATX: 9.6 pouces x 8.3 pouces, 24.4 cm x 21.1 cm) Guide d’installation rapide ASRock P43C-ME CD de soutien ASRock P43C-ME Un câble ruban IDE Ultra ATA 66/100/133 80 conducteurs Deux câbles de données de série ATA (SATA) (en option)

  • Page 42: Spécifications

    (voir ATTENTION 5) - Capacité maxi de mémoire système: 8GB (voir ATTENTION 6) Slot d’extension - 1 x slot PCI Express 2.0 x16 (bleu @ mode x16) - 1 x slot PCI Express x1 - 2 x slots PCI Audio - 7.1 Son haute définition de CH (codec audio VIA...
  • Page 43 - br. 24 connecteur d’alimentation ATX - br. 4 connecteur d’alimentation 12V ATX - Connecteurs audio internes - Connecteur audio panneau avant - 2 x En-tête USB 2.0 (prendre en charge 4 ports USB 2.0 supplémentaires) (voir ATTENTION 9) BIOS - 8Mb BIOS AMI - BIOS AMI - Support du “Plug and Play”...
  • Page 44 - FCC, CE, WHQL - Prêt pour EuP (alimentation Prêt pour EuP requise) (voir ATTENTION 16) * Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web: http://www.asrock.com ATTENTION Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking, y compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking, ou...
  • Page 45 Guide « Installation du disque dur SATAII » à la page 28 du « Manuel de l’utilisateur » qui se trouve sur le CD de support pour régler votre lecteur de disque dur SATAII au mode SATAII. Vous pouvez aussi directement connecter le disque dur SATA au connecteur SATAII.
  • Page 46 Pour améliorer la dissipation de la chaleur, n’oubliez pas de mettre de la pâte thermique entre le CPU le dissipateur lors de l’installation du PC.
  • Page 47 3 sur CLRCMOS1 pendant 5 secondes. Après avoir court-circuité le cavalier Effacer la CMOS, veuillez enlever le capuchon de cavalier. Toutefois, veuillez ne pas effacer la CMOS tout de suite après avoir mis le BIOS à jour. Si vous avez besoin d’effacer la CMOS lorsque vous avez fini de mettre le BIOS à...
  • Page 48 Veuillez mettre en contact les bornes 2 et 3 pour le cavalier FSB1, les bornes 4 et 5 pour le cavalier FSB2 et les bornes 4 et 5 pour le cavalier FSB3. Dans le cas contraire, le CPU peut ne pas fonctionner correctement sur cette carte mère.
  • Page 49 Veuillez mettre en contact les bornes 2 et 3 pour le cavalier FSB1, les bornes 4 et 5 pour le cavalier FSB2 et les bornes 2 et 3 pour le cavalier FSB3. Dans le cas contraire, le CPU peut ne pas fonctionner correctement sur cette carte mère.
  • Page 50 (voir p.2 No. 24) le côté avec fil rouge côté Broche1 Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. Connecteur IDE primaire (bleu) (IDE1 br. 39, voir p.2 No. 9)
  • Page 51 1. L’audio à haute définition (HDA) prend en charge la détection de fiche, mais le fil de panneau sur le châssis doit prendre en charge le HDA pour fonctionner correctement. Veuillez suivre les instructions dans notre manuel et le manuel de châssis afin installer votre système.
  • Page 52 (voir p.2 No. 4) ien que cette carte mère offre un support de (Ventilateur silencieux) ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur.
  • Page 53 (voir p.2 No. 8) Bien que cette carte mère fournisse un connecteur de courant ATX 24 broches, elle peut encore fonctionner si vous adopter une alimentation traditionnelle ATX 20 broches. Pour utiliser une alimentation ATX 20 broches, branchez à...
  • Page 54 Veuillez connecter l’extrémité noire (A) du câble HDMI_SPDIF (en option) au collecteur HDMI_SPDIF de la carte-mère. Connectez ensuite l’extrémité blanche (B ou C) du câble HDMI_SPDIF au connecteur HDMI_SPDIF de la carte VGA HDMI. A. extrémité noire B. extrémité blanche C.

  • Page 55: Informations Sur Le Cd De Support

    BIOS après le POST, veuillez redémarrer le système en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant.

  • Page 56: Contenuto Della Confezione

    Grazie per aver scelto una scheda madre ASRock P43C-ME, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza.
  • Page 57 1.2 Specifiche Specifiche Specifiche Specifiche Specifiche Piattaforma - Micro ATX Form Factor: 9.6-in x 8.3-in, 24.4 cm x 21.1 cm Processore - LGA 775 per Intel ® Core 2 Extreme / Core 2 Quad / Core ® ® ® Duo / Pentium...
  • Page 58 Connettori - 6 x connettori SATAII 3.0Go/s, sopporta NCQ, AHCI e “Collegamento a caldo” (vedi ATTENZIONE 8) - 1 x connettori ATA133 IDE (supporta fino a 2 dispositivi IDE) - 1 x porta Floppy - 1 x Collettore modulo infrarossi...
  • Page 59 * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può...
  • Page 60 64 bit / Vista / XP 64 bit / XP SP1; SP2. 10. Si tratta di uno strumento di sicronizzazione ASRock di face uso in grado di implementare il controllo del sistema tramite la funzione di hardware monitor e sincronizzare le Vostre unita‘ hardware per ottenere la migliore prestazione in Windows .
  • Page 61 13. Il nome stesso del software – OC DNA – dice di cosa è capace. OC DNA, una utilità esclusiva sviluppata da ASRock, fornisce un modo comodo per registrare le impostazioni OC e condividerle con gli altri. Aiuta a salvare le registrazioni di overclocking nel sistema operativo e semplifica la complicata procedura di registrazione delle impostazioni di overclocking.
  • Page 62 Azzeramento predefinita CMOS Nota: CLRCMOS1 permette di cancellare i dati presenti nel CMOS. I dati del CMOS comprendono le informazioni di configurazione quali la password di sistema, data, ora, e i parametri di configurazione del sistema. Per cancellare e ripristinare i parametri del sistema, spegnere il computer e togliere il cavo di alimentazione dalla presa di corrente.
  • Page 63 è necessario regolare i jumper. Cortocircuitare pin 2 e pin 3 per il jumper FSB1; pin 4 e pin 5 per il jumper FSB2; pin 4 e pin 5 per il jumper FSB3. Diversamente il modulo di memoria può non funzionare in modo appropriato su questa scheda madre.
  • Page 64 Se si desidera eseguire l’overclock della CPU adottata a FSB1600, è necessario regolare i jumper. Ridurre pin2, pin3 per jumper FSB1, pin2, pin3 per jumper FSB2 e pin2, pin3 per jumper FSB3. In caso contrario la CPU potrebbe non funzionare correttamente su questa scheda madre. Fare riferimento alle seguenti impostazioni jumper.
  • Page 65 (33-pin FLOPPY1) Lato del Pin1 con la striscia (vedi p.2 Nr. 24) rossa Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (blu) (39-pin IDE1, vedi p.2 Nr. 9)
  • Page 66 1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei connettori, però il pannello dei cavi sul telaio deve supportare la funzione HDA (High Definition Audio) per far sì che questa operi in modo corretto. Attenersi alle istruzioni del nostro manuale e del manuale del telaio per installare il sistema.
  • Page 67 Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare anche senza la funzione di controllo della velocità della ventola. Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3.
  • Page 68 ATX a 24 pin, ma può funzionare lo stesso se si adotta un alimentatore ATX a 20 pin. Per usare l’alimentatore ATX a 20 pin, collegare l’alimentatore con il Pin 1 e il Pin 13. Installazione dell’alimentatore ATX a 20 pin...
  • Page 69 BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema. Per informazioni più dettagliate circa il Setup del BIOS, fare riferimento al Manuale dell’Utente (PDF file) contenuto nel cd di...

  • Page 70: Contenido De La Caja

    ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 71 Especificación Especificación Especificación 1 . 2 1 . 2 Especificación Plataforma - Factor forma Micro ATX: 24,4 cm x 21,1 cm, 9,6” x 8,3” Procesador - LGA 775 para Intel ® Core 2 Extreme / Core 2 Quad / Core ®...
  • Page 72 - 24-pin cabezal de alimentación ATX - 4-pin conector de ATX 12V power - Conector de Audio Interno - Conector de audio de panel frontal - 2 x Cabezal USB 2.0 (admite 4 puertos USB 2.0 adicionales) (vea ATENCIÓN 9) BIOS - 8Mb AMI BIOS - AMI legal BIOS - Soporta “Plug and Play”...
  • Page 73 ADVERTENCIA Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad liberada o utilizando las herramientas de aumento de velocidad de otros fabricantes.
  • Page 74 Antes de instalar un disco duro SATAII en el conector SATAII, consulte la sección “Guía de instalación de discos duros SATAII” en la página 28 del “Manual de usuario” que se incluye en el CD de soporte para configurar su disco duro SATAII en modo SATAII. También puede conectar un disco duro SATA directamente al conector SATAII.
  • Page 75 ASRock Instant Flash. Ejecute esta herramienta y guarde el archivo correspondiente al sistema BIOS nuevo en su unidad flash USB, unidad de disco flexible o disco duro para poder actualizar el BIOS con sólo pulsar un par de botones, sin necesidad de preparar un disco flexible adicional ni utilizar complicadas utilidades de programación.
  • Page 76 3 para habilitar +5VSB (vea p.2, N. 2) (standby) para PS/2 o USB wake up events. Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la fuente de electricidad. Limpiar CMOS (CLRCMOS1, jumper de 3 pins) (vea p.2, N.
  • Page 77 Una las patillas 2 y 3 del puente FSB1, las patillas 4 y 5 del puente FSB2 y las patillas 4 y 5 del puente FSB3. De lo contrario, es posible que el módulo de memoria no funcione correctamente en esta placa base.
  • Page 78 Si desea forzar la CPU para pasar a FSB1600, necesitará ajustar los puentes. Conecte el terminal 2 y el terminal 3 del puente FSB1, el terminal 2 y el terminal 3 del puente FSB2 y el terminal 2 y el terminal 3 del puente FSB3. De lo contrario, la CPU no funcionará...
  • Page 79 (vea p.2, N. 24) la banda roja debe quedar el mismo lado que el contacto 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (azul) (39-pin IDE1, vea p.2, N.
  • Page 80 2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del panel frontal de la siguiente manera: A. Conecte Mic_IN (MIC) a MIC2_L.
  • Page 81 Si pretende enchufar el ventilador de procesador de 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos...
  • Page 82 ATX de 24 pins, ésta puede funcionar incluso si utiliza una fuente de alimentación ATX de 20 pins tradicional. Para usar una fuente de alimentación ATX de 20 pins, por favor, conecte su fuente de alimentación usando los Pins 1 y 13.
  • Page 83 Conecte el extremo negro (A) del cable HDMI_SPDIF en la (Opcional) cabecera HDMI_SPDIF de la placa base. Conecte después el extremo blanco (B o C) del cable HDMI_SPDIF en el conector HDMI_SPDIF de la tarjeta VGA HDMI. A. Extremo negro B.
  • Page 84 Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora.
  • Page 85 Gratos por comprar nossa placa–mãe P43C-ME, um produto confiável feito com ASRock um estrito controle de qualidade consistente. Com um excelente desempenho, essa placa é dotada de um projeto robusto que atende a ASRock de compromisso com a qualidade e durabilidade.
  • Page 86 - Capacidade máxima de memória do sistema: 8GB (veja o AVISO 6) Slots de Expansão - 1 x slots de PCI Express 2.0 x16 (modo azul @ x16) - 1 x slots de PCI Express x1 - 2 x slots de PCI Áudio...
  • Page 87 Microfone (veja o AVISO 7) Conectores - 6 x conectores SATAII, suporte a taxa de transferência de dados de até 3,0 Gb/s, suporte NCQ, AHCI e “conexão a quente” (veja o AVISO 8) - 1 x conectores ATA133 IDE (suporta até 2 dispositivos IDE) - 1 x porta para disquete - 1 x Conector do módulo de infravermelho...
  • Page 88 AVISO Tenha em atenção que a operação de overclocking envolve alguns riscos, nomeadamente no que diz respeito ao ajuste das definições do BIOS, à aplicação da tecnologia Untied Overclocking ou à utilização de ferramentas de overclocking de terceiros. O overclocking pode afectar a estabilidade do seu sistema ou até...
  • Page 89 Em termos do microfone, esta placa-principal suporta ambos os modos estéreo e mono. Quanto à saída de áudio, esta placa-principal suporta os modos de 2, 4, 6 e 8 canais. Consulte a tabela na página 3 para uma ligação correcta.
  • Page 90 12. ASRock Instant Flash est un utilitaire de flash du BIOS flash intégré dans la ROM Flash. Cet outil pratique de mise à jour du BIOS vous permet de mettre à jour le BIOS du système sans entrer d’abord dans un système d’exploitation tel que MS-DOS ou Windows...
  • Page 91 (veja a folha 2, No. 2) para PS/2 ou eventos de wake up na USB. Nota: Para escolher +5VSB, é preciso uma corrente de stand by de 2 A ou mais. Restaurar CMOS (CLRCMOS1, jumper de 3 pinos) (veja a folha 2, No. 32) Configuração-padrão...
  • Page 92 Ligue os pinos 2 e 3 para o jumper FSB1, os pinos 4 e 5 para o jumper FSB2 e os pinos 4 e 5 para o jumper FSB3. Caso contrário, o módulo de memória poderá não funcionar devidamente nesta placa principal.
  • Page 93 Ligue os pinos 2 e 3 para o jumper FSB1, os pinos 2 e 3 para o jumper FSB2 e os pinos 2 e 3 para o jumper FSB3. Caso contrário, a CPU poderá não funcionar devidamente nesta placa principal.
  • Page 94 (FLOPPY 1, 33 pinos) (veja a folha 2, No. 24) o lado com listras vermelhas para o Pino 1 Nota: Certifique-se de que o lado com listras vermelhas no cabo seja conectado ao lado Pino 1 do conector. Conector primário (Azul) (IDE1 de 39 pinos, veja a folha 2, No.
  • Page 95 Estes conectores permitem que se receba entrada de (CD1 de 4 pinos) áudio em estéreo de fontes (CD1: veja a floha 2, No. 25) de áudio como CD-ROM, DVD-ROM, placa sintonizadora de TV ou placa MPEG. Conector Áudio do painel Esta é...
  • Page 96 Siga s instruções que aparecem no manual e no manual do chassis para instalar o sistema. 2. Se utilizar o painel de áudio AC’97, instale-o no cabeçalho de áudio do painel frontal, como a figura abaixo mostra: A. Ligue o Mic_IN (MIC) ao MIC2_L.
  • Page 97 20 pinos. Para usar a fonte de alimentação de 29 pinos, por favor ligue a sua fonte de alimentação com o Pino 1 e o Pino 13. Instalação da Fonte de alimentação ATX de 20 Pinos Conector ATX 12 V Note que é...
  • Page 98 Se desejar acessar o Utilitário de Configuração do BIOS depois do POST, reinicie o sistema pressionando <Ctl> + <Alt> + <Del>, ou pressionando o botão de reinício no chassi do sistema. Para as informações detalhadas sobre o Utilitário de Configuração do BIOS, consulte o Manual do Usuário (arquivo PDF) no CD de suporte.
  • Page 99 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 ASRock P43C-ME Motherboard...
  • Page 100 ® ® ® ® ® ® ® 1 1 4 1 1 4 1 1 4 1 1 4 1 1 4 ASRock P43C-ME Motherboard...
  • Page 101 ® 1 1 5 1 1 5 1 1 5 1 1 5 1 1 5 ASRock P43C-ME Motherboard...
  • Page 102 “ ” “ ” ® ® “ ” “ ” 1 1 6 1 1 6 1 1 6 1 1 6 1 1 6 ASRock P43C-ME Motherboard...
  • Page 103 ® ® 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 ASRock P43C-ME Motherboard...
  • Page 104 “ ” “ ” “ ” “ ” 1 1 8 1 1 8 1 1 8 1 1 8 1 1 8 ASRock P43C-ME Motherboard...
  • Page 105 1 1 9 1 1 9 1 1 9 1 1 9 1 1 9 ASRock P43C-ME Motherboard...
  • Page 106 SATAII_6 SATAII_4 (Port 5) (Port 3) SATAII_5 SATAII_3 (Port 4) (Port 2) 1 2 0 1 2 0 1 2 0 1 2 0 1 2 0 ASRock P43C-ME Motherboard...
  • Page 107 1 2 1 1 2 1 1 2 1 1 2 1 1 2 1 ASRock P43C-ME Motherboard...
  • Page 108 4 3 2 1 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 ASRock P43C-ME Motherboard...
  • Page 109 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 ASRock P43C-ME Motherboard...
  • Page 110 “ ” “ ” 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 ASRock P43C-ME Motherboard...
  • Page 111 1 2 5 1 2 5 1 2 5 1 2 5 1 2 5 ASRock P43C-ME Motherboard...
  • Page 112 ® ® ® ® ® ® ® 1 2 6 1 2 6 1 2 6 1 2 6 1 2 6 ASRock P43C-ME Motherboard...
  • Page 113 ® ® 1 2 7 1 2 7 1 2 7 1 2 7 1 2 7 ASRock P43C-ME Motherboard...
  • Page 114 ® ® 1 2 8 1 2 8 1 2 8 1 2 8 1 2 8 ASRock P43C-ME Motherboard...
  • Page 115 ® ® ® ® 1 2 9 1 2 9 1 2 9 1 2 9 1 2 9 ASRock P43C-ME Motherboard...
  • Page 116 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 ASRock P43C-ME Motherboard...
  • Page 117 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 ASRock P43C-ME Motherboard...
  • Page 118 SATAII_6 SATAII_4 (Port 5) (Port 3) SATAII_5 SATAII_3 (Port 4) (Port 2) 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 ASRock P43C-ME Motherboard...
  • Page 119 1 3 3 1 3 3 1 3 3 1 3 3 1 3 3 ASRock P43C-ME Motherboard...
  • Page 120 4 3 2 1 1 3 4 1 3 4 1 3 4 1 3 4 1 3 4 ASRock P43C-ME Motherboard...
  • Page 121 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 ASRock P43C-ME Motherboard...
  • Page 122 ® ® 1 3 6 1 3 6 1 3 6 1 3 6 1 3 6 ASRock P43C-ME Motherboard...
  • Page 123 1 3 7 1 3 7 1 3 7 1 3 7 1 3 7 ASRock P43C-ME Motherboard...

Table of Contents