How To Use The Magtek Scra Oem Demo; Connecting To A Magtek Scra Oem Device - Magtek aDynamo Demo Manual

3 - How to use the MagTek SCRA OEM Demo

3 How to use the MagTek SCRA OEM Demo
This section describes how to use the MagTek SCRA OEM Demo on an Android host. Some peripherals
are not included in every MagTek OEM device. Use each feature of the Demo accordingly.

3.1 Connecting to a MagTek SCRA OEM Device

1) Connect the MagTek SCRA OEM device to the Android host USB port using an OTG cable.
2) Press on to launch the app.
MagTek SCRA OEM Demo
3) To start the process of connecting, press on Connect .
4) Select the appropriate peripheral connected to the MagTek SCRA OEM device's SPI Port and UART
Port, and then press on Connect .
aDynamo, uDynamo, Dynamag, DynaMAX, eDynamo, mDynamo, BulleT, tDynamo, DynaWave, iDynamo 5 (Gen III)| Secure Card Reader
Authenticator | MagTek SCRA Demo and OEM Demo Manual ( Android )
Page 18