Advertisement
Quick Links
Quick Start Guide
Step 1 - Assembling
1
2
Insert two screws in
Insert two wipers into
an opposite direction,
bottom suction door.
and screw tightly to
assemble the included
flipper into the device.
Email：support@wybotpool.com
Facebook: @WybotPool
Step 2 - Charging
3
4
Insert charger cable into the charging port, and
keep your device at least 3m away from pool.
Fully assembled.
Website: www.wybotpool.com
5
fully
charged!
The flipper is brittle, do
Ensure you've turned
not put upside down
off the device, other-
when charging.
wise, it will beep when
charging.
Fully charge it before
first use.
Osprey 200 SE
7
6
The device will alert if it exceeds
Turn on the device and you
3 minutes, then you should
will hear a beep sound.
relaunch the device.
Put it into the pool within 3
minutes.
Need to relaunch
the cleaner!
Advertisement
Related Manuals for WYBOT Osprey 200 SE
Summary of Contents for WYBOT Osprey 200 SE
- Page 1 Quick Start Guide Osprey 200 SE Step 1 - Assembling Step 2 - Charging fully charged! Need to relaunch the cleaner! Insert charger cable into the charging port, and keep your device at least 3m away from pool. The flipper is brittle, do Ensure you’ve turned...
- Page 2 Quick Start Guide Osprey 200 SE Step 4 - Submerging the device Step 5 - Removal from the pool Step 6 - Cleaning the filter Hook it out of the pool. Store the cleaner in a ventilated place and keep it out of direct sunlight or inclement weather.
Need help?
Do you have a question about the Osprey 200 SE and is the answer not in the manual?
Questions and answers