Do you have a question about the S2 and is the answer not in the manual?
Questions and answers
Larry Robinson
July 17, 2025
Why won't cleaner return to charger?
1 comments:
Mr. Anderson
September 1, 2025
The WYBOT S2 cleaner may not return to its charger due to poor contact between the charger and the device. The suggested solution is to re-plug the charger.
This answer is automatically generated
Pat O'Neill
July 15, 2025
Where do the floats and rubber bumper go??
Not mentioned in the manual or quick start guide...
jose luis rosso gutierrez
July 6, 2025
NO SE COMO BAJAR LA APLICACION DELWIBOT S2 NI EN EL TELEFONO NI EN EL ORDENADOR PUEDEN DECIRME POR FAVOR COMO BAJO LA APLICACION MUCHAS GRACIAS
Alice Stolarz
May 31, 2025
Where do the floating parts go on the Wybot S2 model?
Page 1
Robotic Pool Cleaner User Manual WYBOT S2(WY210C) www.wybotpool.com Email: support@wybotpool.com Facebook: @WybotPool WYBOTICS CO.,LTD No.30, Zhongnan 4th Street West Zone, TEDA Tianjin, China Read through the entire manual before running your new All trade names are registered trademarks of respective manufacturers listed.
Page 2
Thank you for choosing WYBOT products, your support means a lot to us. Continu- ous providing the best solution to free you up from pool cleaning and enjoy your family time is always our pursuit. WYBOT Robotic Pool Cleaner is dedicated to serving you high efficiency, low power consumption, easy operation and thorough pool cleaning work.
Read the manual carefully before you use the cleaner. Your safety is the most important thing. Please read through and operate the device as per instructions, WYBOTICS Co., Ltd. is not held liable for any loss or injury caused by improper use. WYBOT S2(WY210C) AT A GLANCE Product External Overview Warning...
Product Internal Overview WYBOT S2(WY210C) AT A GLANCE Product External Overview Sealed Part Filter Foam (Cotton foam) Important components are sealed there. An auxiliary filter to help trap the fine dirty For your safety, do not try to disassemble it particles.
Below is the indication of the LED lights, you may refer to it to know different device GET STARTED status. Charge your new WYBOT S2(WY210C) The device has a lithium-ion rechargeable battery, and you need to charge the batte- ry before first use and when the battery is low.
Standard Full Pool Wall+ Floor+Waterline Connect to your App Pool Floors Floor Only You can download the WYBOT App to your smart mobile device by scanning QR code Pool Walls Wall Only below, or from Google Play or App Store. Pool Waterline...
DO A FILTER CLEANING Press the filter cover handle and lift the cover up. The cleaner begins to clean walls, floor About 20 seconds of self-calibration, the indicator light will turn to be a flashing and waterline as default or your set blue.
1. All WYBOT pool cleaners in the market have been inspected and licensed to be If you encounter the following situations when using the cleaner, you can check sold as per local laws.
Device does A solid red light Impeller is stuck Check the impeller WYBOT robotic pool cleaners have passed all performance and reliability tests not work and clean foreign and also has obtained relevant certifications from the countries in which they are...
Need help?
Do you have a question about the S2 and is the answer not in the manual?
Questions and answers
Why won't cleaner return to charger?
The WYBOT S2 cleaner may not return to its charger due to poor contact between the charger and the device. The suggested solution is to re-plug the charger.
This answer is automatically generated
Where do the floats and rubber bumper go?? Not mentioned in the manual or quick start guide...
NO SE COMO BAJAR LA APLICACION DELWIBOT S2 NI EN EL TELEFONO NI EN EL ORDENADOR PUEDEN DECIRME POR FAVOR COMO BAJO LA APLICACION MUCHAS GRACIAS
Where do the floating parts go on the Wybot S2 model?
Where do you install the floats