Ide Configuration - ASROCK G43TWINS-FULLHD User Manual

ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows

3.4.4 IDE Configuration

3.4.4 3.4.4 IDE Configuration IDE Configuration IDE Configuration
3.4.4 3.4.4 IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
SATAII Configuration
Configure SATAII as
OnBoard IDE Controller [Enabled]
SATAII 1
SATAII 2
SATAII 3
SATAII 4
SATAII 5
SATAII 6
IDE1 Master
IDE1 Slave
AHCI CD/DVD Boot Time out
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
SATAII Configuration
Please select [Compatible] when you install legacy OS. If native OS (Windows
2000 / XP) is installed, please select [Enhanced]. Then in the option
"Configure SATAII as", you are allowed to set the selection to [AHCI] or [IDE]
mode. The default value is [IDE].
If you select [AHCI] mode, the option "Hot Plug" will appear. You are allowed to
use the Hot Plug function under Windows environment if this option is enabled.
Configuration options: [Enabled] and [Disabled].
AHCI (Advanced Host Controller Interface) supports NCQ and other
new features that will improve SATA disk performance but IDE
mode does not have these advantages.
Vista certification.
® TM
Options
Disabled
[Enhanced]
Compatible
[IDE]
Enhanced
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen Select Screen
[Not Detected]
Select Item Select Item
[Not Detected]
+- +- Change Option Change Option
[Not Detected]
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
[20]
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
4 7 4 7 4 7
4 7 4 7